Example of computer signal | Dukane 8918, 8943 instruction

Projector

8918/8943

User's Manual – Operating Guide

Technical

Example of computer signal

Resolution (H x V)	H. frequency (kHz)	V. frequency (Hz)	Rating	Signal mode


720 x 400	37.9	85.0	VESA	TEXT
640 x 480	31.5	59.9	VESA	VGA (60Hz)
640 x 480	37.9	72.8	VESA	VGA (72Hz)
640 x 480	37.5	75.0	VESA	VGA (75Hz)
640 x 480	43.3	85.0	VESA	VGA (85Hz)
800 x 600	35.2	56.3	VESA	SVGA (56Hz)
800 x 600	37.9	60.3	VESA	SVGA (60Hz)
800 x 600	48.1	72.2	VESA	SVGA (72Hz)
800 x 600	46.9	75.0	VESA	SVGA (75Hz)
800 x 600	53.7	85.1	VESA	SVGA (85Hz)
832 x 624	49.7	74.5		Mac 16” mode
1024 x 768	48.4	60.0	VESA	XGA (60Hz)
1024 x 768	56.5	70.1	VESA	XGA (70Hz)
1024 x 768	60.0	75.0	VESA	XGA (75Hz)
1024 x 768	68.7	85.0	VESA	XGA (85Hz)
1152 x 864	67.5	75.0	VESA	1152 x 864 (75Hz)
1280 x 960	60.0	60.0	VESA	1280 x 960 (60Hz)
1280 x 1024	64.0	60.0	VESA	SXGA (60Hz)
1280 x 1024	80.0	75.0	VESA	SXGA (75Hz)
1280 x 1024	91.1	85.0	VESA	SXGA (85Hz)
1600 x 1200	75.0	60.0	VESA	UXGA (60Hz)
1280 x 768	47.7	60.0	VESA	W-XGA (60Hz)
1400 x 1050	65.2	60.0	VESA	SXGA+ (60Hz)

NOTE • Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer.

•Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.

•Depending on the input signal, full-size display may not be possible in some cases. Refer to the number of display pixels above.

•Although the projector can display signals with resolution up to UXGA (1600x1200), the signal will be converted to the projector’s panel resolution before being displayed. The best display performance will be achieved if the resolutions of the input signal and projector panel are identical.

•Automatically adjustment may not function correctly with some input signals.

•The image may not be displayed correctly when the input sync signal is a composite sync or a sync on G.

1

Image 71

Dukane 8918, 8943 user manual Example of computer signal

Contents

USER’S Manual Trademark acknowledgment About this manualThank you for purchasing this projector Content Fastening the lens cover Contents of package HOT Part namesProjector HOT!4 Video port 10 Control panelRear panel M1-D port 10 Enter button to push down the center point Remote controlBack Remote control Laser pointer 13 It is a beam outlet Setting up Down ArrangementOn a horizontal surface Suspended from the ceiling Foot Adjusting the projectors elevatorUsing the security bar and slot Security bar Anti-theft chain or wire Security slot VCR/DVD player Connecting your devicesSignal source Remote control Speakers About Plug-and-Play capability Connecting your devices AC inlet Connector of the power cord to the outlet Connecting power supply Laser button Remote controlLaser pointer Putting batteries Changing the frequency of remote control signal About the remote control signal Using as a simple PC mouse & keyboard Using as a wired remote control Power switch is turned on after the power was turned off by Power on/offTurning on the power Turning off the power Temporarily muting the sound Adjusting the volumeSelecting an input signal Operating Selecting an aspect ratio Searching an input signalSelecting an input signal  For a video signal or s-video signal Adjusting the zoom and focusAdjusting the lens shift Using the automatic adjustment feature Press the Keystone button on Adjusting the positionRemote control. a dialog will appear on Correcting the keystone distortions Magnify indication will appear on the screen Using the magnify featurePress the on button of Magnify on the remote control Freezing the screen Temporarily blanking the screen Enter button Using the menu functionAdvanced Menu Easy Menu Easy Menu Gamma Picture Menu Color Temp Using the / buttons switches the color temperature modePicture Menu Custom and then pressing the button or SAVE1, SAVE2, SAVE3, SAVE4 Active IrisLOAD1, LOAD2, LOAD3, LOAD4 MY Memory Position Image MenuOver Scan Size PhaseAuto Adjust Image Menu Color Space Input MenuProgressive 3D-YCS M1-D Input MenuComponent Video Format RGB Frame Lock Custom Resolution BOX Resolution Function may not work well Setup MenuSome input, this function may not work well Function may not work correctly Normal ó Hinvert ó Vinvert ó H&VINVERT Setup MenuNormal ó Whisper Brightness are reduced Audio Menu Or keep no operation for about 10 seconds Using the /// buttons adjusts the menu positionUsing the / buttons switches the mode for the blank screen Screen Menu Start UP Screen Menu MyScreen registration is finished Capturing error has occurred. Please try again Source Name Message Auto on Option MenuAuto Search Lamp Time Option MenuAuto OFF FAN Speed ServiceUsing the / buttons switches the rotation speed Performs automatic keystone distortion correction 35 Lens Type GhostFilter Message Remote Freq Factory ResetKEY Lock Remote Receiv Security Using Security FeaturesInputting the Password Changing the Password Setting the Password Using the MyScreen Password FunctionDescription If you have forgotten your Password Turning on the MyScreen Password Registering the PIN Code Using the PIN Lock FunctionTurning the Password off If you have forgotten your PIN Code Turning Off the PIN Lock Function Turning On the Transition Detector Function Using the Transition Detector FunctionSetting the Transition Detector Password BOX Setting the Transition Detector off Network Menu Date and Time Network MenuTime Difference Network functions Refer to the separate volume on Network Functions Type number = Replacing the lamp MaintenanceCase of replacement by yourself Lamp Lamp Lamp Air filter Type number = MU03642 Cleaning the air filter Air filter Will come up. Remove the battery Put a new battery Internal clock batteryTake the old battery out Maintenance Related messages TroubleshootingThere is no input signal Internal temperature is rising Regarding the indicator lamps Regarding the indicator lamps Signal source does not correctly work Electrical power cord is not pluggedPower switch is not set to the on position Signal cables are not correctly connected Color Space setting is not suitable Volume is adjusted to an extremely low levelAudio setting is not correct Color settings are not correctly adjusted Lamp is approaching the end of its product Lifetime Not properly adjustedEither the focus and/or horizontal phase settings are Whisper function is working Specification Warranty and after-service Specifications Example of computer signal Initial set signals M1-D At RGB signalConnection to the ports Connection to the ports Mini DIN 4pin jack Pin Ø3.5 stereo mini jack MVrms 1kΩ output impedance Ø3.5 stereo mini jack MVrms 47kΩ terminatorRCA jack MVrms 47kΩ terminator RJ-45 jack Pin Signal RS-232C Communication Connecting the cableCommunications setting Increasing the projector setting value Increment command Requesting projector status Get commandChanging the projector settings Set command Using the projector default settings Reset Command Be EF CRC Be EF EA F5 Be EF CE D6 Normal Be EF Be EF B6 CD Be EF CE FE High Be EF English Be EF C2 FF Freeze User’s Manual Network Functions Still Image Transfer Failure & Warning Alerts via E-mailProjector Management via Snmp Controlling the Projector via Scheduling If using a network with Dhcp enabled Before using the network functions… Configuring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Https//192.168.1.10 into Settings Network Information Displays the Dhcp configuration settings Dhcp OFF Network SettingsDisplays and configures network settings Dhcp on Click the Apply button to save the settings Port SettingsDisplays and configures communication port settings Displays and configures e-mail addressing settings Mail Settings Displays and configures failure & warning alerts Alert Settings Air Flow Error Alert SettingsLamp Error Temp Error Filter Error Lamp Time ErrorCool Error Alarm Time Other ErrorSchedule Execution Error Lamp Time Alarm Change the Lamp is Filter Time AlarmTransition Detector Alarm Authentication Failure Displays and configures schedule settings Schedule Settings Schedule Setting Parameter Date/Time SettingsDisplays and configures the date and time settings Sntp Date/Time Settings Security Settings Community Name Security SettingsNetwork Control Snmp Projector Control Projector Control Performs the Automatic keystone distortion correction Selects the 3D-YCS settingProjector Control Option Description AudioScreen Logoff Displays and configures the current projector statusProjector Status Network Restart Example If the IP address of the projector is set to Failure & Warning Alerts via E -mail10 Mail Settings Projector management via Snmp Snmp settingsConfigure the following items via a web browser to use Snmp Controlling the Projector via Scheduling Date/Time setting can be adjusted via a web browser Date/Time Settings 18 Schedule settings can be configured from a web browser Schedule Settings 16 Following port is used for e-SHOT TCP #9716 Shot Still Image Transfer SettingsShot Still Image Transfer Display Communication Port Shot Still Image Transfer Transmission Shot Still Image Transfer Settings Command Control Settings 9 Command Control via the Network 20 Command Control Settings Send Data format Command formatReply Error code Header Data RS-232Ccommand Reply Data format Automatic Connection Break Authentication Typical Symbols Read this Safety Guide first Never disassemble and modify Never use the projector if a problem should occurUse special caution for children and pets Do not insert liquids or foreign object Be sure to connect with ground wire Be cautious of High temperatures of the projectorNever look through the lens or openings when the lamp is on Be cautious of the power cord connection Be careful in handling the light source lamp Be careful in handling the battery of the remote control Avoid a smoky, humid or dusty place Avoid a high temperature environmentBe careful in moving the projector Do not put anything on top of the projector Take care of the lens Remove the power cord for complete separationDo not give the remote control any physical impact Take care of the cabinet and the remote control About consumables About displaying characteristicTurn the power on/off in right order Connecting with notebook computer Bulb is not broken Clean the projector or replace the lamp yourselfProjector vents, or get it in your eyes or mouth Damaging the lamp For the Customers in Canada FCC Statement Warning Audio Visual Products