Dukane 8943, 8918 user manual e-SHOT Still Image Transfer Transmission

e-SHOT(Still Image Transfer) Display

e-SHOT (Still Image Transfer) Settings (Continued)

When the authentication setting is enabled, the following settings are required.

6)Click [Security Settings] on the main menu.

7)Select [Network Control] and enter the desired authentication password. * see Note1

8)Click the [Apply] button to save the settings. * see Note2

NOTE1 • The Authentication Password will be the same for [Network Control Port1 (Port: 23)], [Network Control Port2 (Port: 9715)], and [Image Transfer Port (Port: 9716)].

NOTE2 • The new configuration settings are activated after restarting the network. Restart the network connection when any configuration settings are changed. The network connection can be restarted using [Network Restart] on the main menu.

e-SHOT (Still Image Transfer) Transmission

e-SHOT transmission requires an exclusive application for your PC. You can download it from the Hitachi web site. Refer to the manual for the application for instructions.

33