Dukane 8943, 8918 user manual SCREEN Menu continued

SCREEN Menu

SCREEN Menu (continued)

Item

Description

Using the ▲/▼ buttons turns on/off the message function.

TURN ON ó TURN OFF

	When the TURN ON is selected, the following message function works.
	“AUTO IN PROGRESS” while automatically adjusting
	“NO INPUT IS DETECTED”
	“SYNC IS OUT OF RANGE”
	“Searching….” while searching for the input
MESSAGE	“Detecting….” while an input signal is detected
	The indication of the input signal displayed by changing
	The indication of the aspect ratio displayed by changing
	The indication of the PICTURE MODE displayed by changing
	The indication of the ACTIVE IRIS displayed by changing
	The indication of the MY MEMORY displayed by changing
	The indication of "FREEZE" and "II" while freezing the screen by
	pressing the FREEZE button.

•When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfunction (21).

	Each input port for this projector can have a name applied to it.
	(1) Use the ▲/▼ buttons on the SCREEN menu to		5174%'0#/'
	select SOURCE NAME and press the ► button.
	The SOURCE NAME menu will be displayed.		4)$
			4)$&'5-6122%
	(2) Use the ▲/▼ buttons on the SOURCE		%1/210'06&8&
			58+&'1%#/'4#
	NAME menu to select the port to be named
			8+&'1864
	and press the ► button. Right side of the
	menu is blank until a name is specified.		0#/'4)$	5'.'%6
				
	The SOURCE NAME dialog will be displayed.		4)$
			#$%&'()*+,-./0		
	(3) The current name will be displayed on the		123456789:;<
			CDEFGHIJKLMNOP
	first line. Use the ▲/▼/◄/► buttons and the		QRSTUVWXYZ[\
			
	ENTER or INPUT button to select and enter
			A!
	characters. The RESET button can be used to		'5%37+6	'06'40':6
SOURCE NAME	erase 1 character at a time. The name can be a		0#/'4)$	5'.'%6
	maximum of 16 characters.		4)$	
	(4) To change an already inserted character, press		#$%&'()*+,-./0		
			123456789:;<
	the ▲ button while the cursor is on the [A-N]		CDEFGHIJKLMNOP
			QRSTUVWXYZ[\
	row to move the cursor to the name displayed on		
			A!
	the first line and use the ◄/► buttons to select
			'5%37+6
	character to be changed. Once a character in the			5'.'%6
	name is selected use the ▼ button to move the		0#/'4)$
			4)$	
	cursor back down to the character entry area to
			#$%&'()*+,-./0
	select and enter characters as described above.		123456789:;<		
			CDEFGHIJKLMNOP
	(5) Select	and press the ENTER or	QRSTUVWXYZ[\
			
	INPUT buttons when finished entering text.		A!
	To revert to the previous name without		'5%37+6	'06'40':6
	saving changes press the ESC or ◄ button
	and the INPUT button simultaneously.
				41