OPTION Menu
OPTION Menu (continued)
Item | Description |
KEY LOCK
Using the ▲/▼ buttons turns on/off the key lock feature. When
TURN ON is selected, the buttons on the projector except the
STANDBY/ON button are locked.
TURN ON ó TURN OFF
•Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control.
| REMOTE RECEIV. |
| |
| (1) Select a remote sensor using the ▲/▼ button. |
| |
| 1:FRONT ó 2:TOP ó 3:REAR |
| |
| (2) Switch it using the ENTER button | ||
| 4'/16'4'%'+8 | ||
| ¨ (off) ó þ (on) | ||
| (4106 | ||
| • A sensor cannot be turned off when the other | 612 | |
| two are off. Always at least one sensor is on. | 4'#4 | |
|
| ||
| REMOTE FREQ. |
| |
| Use the ▲/▼ button to change the Projector's remote sensor | ||
| setting (14). |
| |
| 1:NORMAL ó 2:HIGH |
| |
| Items with a checkmark are on. The factory |
| |
| default setting is for both 1:NORMAL and 2: | ||
| 4'/16'(4'3 | ||
| HIGH to be on. If the remote control does not | ||
| 014/#. | ||
SERVICE | function correctly set the this to either only | ||
*+)* | |||
| 1 or only 2 as described in Remote Control |
| |
| Settings (14). |
| |
| Neither can be turned off at the same time. |
| |
INFORMATION
Selecting this item displays a dialog titled “INPUT INFORMATION”.
It shows the information about the current input.
RGB | COMPONENT | |
04x768 @60Hz | SECAM | 576i @50 |
FRAME LOCK | AUTO | SCART RGB |
•The “FRAME LOCK” message on the dialog means the frame lock function is working.
•The “SCART RGB” message means the COMPONENT VIDEO port is working as a SCART RGB input port. Please refer to the COMPONENT item in INPUT menu (32).
•This item can't be selected for no signal and sync out.
FACTORY RESET
Selecting RESET using the button ▲ performs this function. By this function, all the items in all of menus will collectively return to the initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE and SECURITY are not reset.
RESET ï CANCEL
(continued on next page)
46
