Dukane 8918, 8943 Searching an input signal, Selecting an aspect ratio, Selecting an input signal

Operating

Selecting an input signal (continued)

1. Press the VIDEO button on the remote control to select an input for video signal.

Each time you press the button, the projector switches its video input port as below.

COMPONENT (Y, CB/RB, CR/BR)  S-VIDEO  VIDEO

LASER

INDICATOR

STANDBY/ON VIDEO RGB

●If the VIDEO button is pushed (when switching from RGB to VIDEO signals) when TURN ON is selected for the AUTO SEARCH item in the OPTION menu the projector will check the COMPONENT (Y, CB/RB, CR/BR) port first. If no input is detected at the port, the projector will check other ports in above order.

Searching an input signal		MAGNIFY	MY BUTTON	VOLUME
		ON	1
1.	Press the SEARCH button on the remote control.			MUTE
		OFF	2
	The projector will start to check its input ports in order to	FREEZE	KEYSTONE	SEARCH

find any input signals.

When an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the operation.

RGB 1  RGB 2  M1-D  COMPONENT (Y, CB/RB, CR/BR)  S-VIDEO  VIDEO

Selecting an aspect ratio

1. Press the ASPECT button on the remote control.

Each time you press the button, the projector switches the mode for aspect ratio in turn.

For an RGB signal

NORMAL  4:3  16:9  SMALL

For an M1-D signal

NORMAL  4:3  16:9  14:9  SMALL

ASPECT

For a video signal, s-video signal or component video signal 4:3  16:9  14:9  SMALL

For no signal

4:3 (fixed)

●The NORMAL mode keeps the original aspect ratio of the signal.

●Performing the automatic adjustment initializes the aspect ratio setting.

18