MyScreen registration is finished | Dukane 8918, 8943 instruction

SCREEN Menu

SCREEN Menu (continued)

Item

Description

This item allows you to capture an image for use as a MyScreen

image which can be used as the BLANK screen and START UP

screen. Display the image you want to capture before executing the

following procedure.

1. Selecting this item displays a dialog

/[5ETGGP

titled “MyScreen”. It will ask you if

&Q[QWUVCTVECRVWTKPIVJKURKEVWTG!

you start capturing an image from the

'5% 01'06 ;'5

current screen.

Please wait for the target image to be displayed, and press

the ENTER button on the remote control when the image is

displayed. The image will freeze and the frame for capturing will

appear.

To stop performing, press the RESET or ESC button on the

remote control.

2. Using the ▲/▼/◄/► buttons adjusts

the frame position.

Please move the frame to the position

of the image which you want to use. The

MyScreen

/[5ETGGP

/QXGVJGECRVWTGCTGC

frame may not be able to be moved for

CU[QWYCPV

4'5'6

4'6740'06'4 0':6

some input signals.

/[5ETGGP

To start registration, press the ENTER

button on the remote control.

To restore the screen and return to the previous dialog, press the

RESET or ESC button on the remote control.

Registration takes several minutes.

When the registration is completed, the registered screen and the

following message is displayed for several seconds:

“MyScreen registration is finished.”

If the registration failed, the following message is displayed:

“A capturing error has occurred. Please try again.”

•This item cannot be selected for an M1-D signal.

•This function cannot be selected when the TURN ON is selected to the MyScreen Lock item (below).

•This function cannot be selected when the TURN ON is selected to the MyScreen PASSWARD of SECURITY item in OPTION menu (48).

Using the ▲/▼ buttons turns on/off the MyScreen lock function.

TURN ON ó TURN OFF

When the TURN ON is selected, the item MyScreen is locked. Use MyScreen Lock this function for protecting the current MyScreen.

•This function cannot be selected when the TURN ON is selected to the MyScreen PASSWARD of SECURITY item in OPTION menu (48).

(continued on next page)

40

Image 41

Dukane 8918, 8943 user manual MyScreen registration is finished, Capturing error has occurred. Please try again

Contents

USER’S Manual Trademark acknowledgment About this manualThank you for purchasing this projector Content Fastening the lens cover Contents of package Projector Part namesHOT!4 HOT Rear panel Control panelM1-D port 10 Video port 10 Back Remote control Remote controlLaser pointer 13 It is a beam outlet Enter button to push down the center point Setting up On a horizontal surface ArrangementSuspended from the ceiling Down Using the security bar and slot Adjusting the projectors elevatorSecurity bar Anti-theft chain or wire Security slot Foot VCR/DVD player Connecting your devicesSignal source Remote control Speakers About Plug-and-Play capability Connecting your devices AC inlet Connector of the power cord to the outlet Connecting power supply Laser pointer Remote controlPutting batteries Laser button Changing the frequency of remote control signal About the remote control signal Using as a simple PC mouse & keyboard Using as a wired remote control Turning on the power Power on/offTurning off the power Power switch is turned on after the power was turned off by Selecting an input signal Adjusting the volumeOperating Temporarily muting the sound Selecting an aspect ratio Searching an input signalSelecting an input signal Adjusting the lens shift Adjusting the zoom and focusUsing the automatic adjustment feature  For a video signal or s-video signal Remote control. a dialog will appear on Adjusting the positionCorrecting the keystone distortions Press the Keystone button on Press the on button of Magnify on the remote control Using the magnify featureFreezing the screen Magnify indication will appear on the screen Temporarily blanking the screen Enter button Using the menu functionAdvanced Menu Easy Menu Easy Menu Gamma Picture Menu Picture Menu Using the / buttons switches the color temperature modeCustom and then pressing the button or Color Temp LOAD1, LOAD2, LOAD3, LOAD4 Active IrisMY Memory SAVE1, SAVE2, SAVE3, SAVE4 Position Image MenuOver Scan Auto Adjust PhaseImage Menu Size Progressive Input Menu3D-YCS Color Space Component Input MenuVideo Format M1-D RGB Frame Lock Custom Resolution BOX Resolution Some input, this function may not work well Setup MenuFunction may not work correctly Function may not work well Normal ó Whisper Setup MenuBrightness are reduced Normal ó Hinvert ó Vinvert ó H&VINVERT Audio Menu Using the / buttons switches the mode for the blank screen Using the /// buttons adjusts the menu positionScreen Menu Or keep no operation for about 10 seconds Start UP Screen Menu MyScreen registration is finished Capturing error has occurred. Please try again Source Name Message Auto on Option MenuAuto Search Lamp Time Option MenuAuto OFF Using the / buttons switches the rotation speed ServicePerforms automatic keystone distortion correction 35 FAN Speed Lens Type GhostFilter Message KEY Lock Factory ResetRemote Receiv Remote Freq Inputting the Password Using Security FeaturesChanging the Password Security Description If you have forgotten your Password Using the MyScreen Password FunctionTurning on the MyScreen Password Setting the Password Registering the PIN Code Using the PIN Lock FunctionTurning the Password off If you have forgotten your PIN Code Turning Off the PIN Lock Function Turning On the Transition Detector Function Using the Transition Detector FunctionSetting the Transition Detector Password BOX Setting the Transition Detector off Network Menu Time Network MenuDifference Date and Time Network functions Refer to the separate volume on Network Functions Case of replacement by yourself MaintenanceLamp Type number = Replacing the lamp Lamp Lamp Air filter Type number = MU03642 Cleaning the air filter Air filter Will come up. Remove the battery Put a new battery Internal clock batteryTake the old battery out Maintenance There is no input signal TroubleshootingInternal temperature is rising Related messages Regarding the indicator lamps Regarding the indicator lamps Power switch is not set to the on position Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly work Audio setting is not correct Volume is adjusted to an extremely low levelColor settings are not correctly adjusted Color Space setting is not suitable Either the focus and/or horizontal phase settings are Not properly adjustedWhisper function is working Lamp is approaching the end of its product Lifetime Specification Warranty and after-service Specifications Example of computer signal Initial set signals M1-D At RGB signalConnection to the ports Connection to the ports Mini DIN 4pin jack Pin Ø3.5 stereo mini jack MVrms 1kΩ output impedance Ø3.5 stereo mini jack MVrms 47kΩ terminatorRCA jack MVrms 47kΩ terminator RJ-45 jack Pin Signal RS-232C Communication Connecting the cableCommunications setting Changing the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment command Be EF CRC Be EF EA F5 Be EF CE D6 Normal Be EF Be EF B6 CD Be EF CE FE High Be EF English Be EF C2 FF Freeze User’s Manual Network Functions Projector Management via Snmp Failure & Warning Alerts via E-mailControlling the Projector via Scheduling Still Image Transfer If using a network with Dhcp enabled Before using the network functions… Configuring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Https//192.168.1.10 into Settings Network Information Displays the Dhcp configuration settings Displays and configures network settings Network SettingsDhcp on Dhcp OFF Click the Apply button to save the settings Port SettingsDisplays and configures communication port settings Displays and configures e-mail addressing settings Mail Settings Displays and configures failure & warning alerts Alert Settings Lamp Error Alert SettingsTemp Error Air Flow Error Filter Error Lamp Time ErrorCool Error Schedule Execution Error Other ErrorLamp Time Alarm Alarm Time Transition Detector Alarm Filter Time AlarmAuthentication Failure Change the Lamp is Displays and configures schedule settings Schedule Settings Schedule Setting Parameter Date/Time SettingsDisplays and configures the date and time settings Sntp Date/Time Settings Security Settings Network Control Security SettingsSnmp Community Name Projector Control Projector Control Performs the Automatic keystone distortion correction Selects the 3D-YCS settingProjector Control Option Description AudioScreen Projector Status Displays and configures the current projector statusNetwork Restart Logoff Example If the IP address of the projector is set to Failure & Warning Alerts via E -mail10 Mail Settings Projector management via Snmp Snmp settingsConfigure the following items via a web browser to use Snmp Controlling the Projector via Scheduling Date/Time setting can be adjusted via a web browser Date/Time Settings 18 Schedule settings can be configured from a web browser Schedule Settings 16 Shot Still Image Transfer Display Shot Still Image Transfer SettingsCommunication Port Following port is used for e-SHOT TCP #9716 Shot Still Image Transfer Transmission Shot Still Image Transfer Settings Command Control Settings 9 Command Control via the Network 20 Command Control Settings Reply Error code Command formatHeader Data RS-232Ccommand Send Data format Reply Data format Automatic Connection Break Authentication Typical Symbols Read this Safety Guide first Use special caution for children and pets Never use the projector if a problem should occurDo not insert liquids or foreign object Never disassemble and modify Never look through the lens or openings when the lamp is on Be cautious of High temperatures of the projectorBe cautious of the power cord connection Be sure to connect with ground wire Be careful in handling the light source lamp Be careful in handling the battery of the remote control Be careful in moving the projector Avoid a high temperature environmentDo not put anything on top of the projector Avoid a smoky, humid or dusty place Do not give the remote control any physical impact Remove the power cord for complete separationTake care of the cabinet and the remote control Take care of the lens Turn the power on/off in right order About displaying characteristicConnecting with notebook computer About consumables Projector vents, or get it in your eyes or mouth Clean the projector or replace the lamp yourselfDamaging the lamp Bulb is not broken For the Customers in Canada FCC Statement Warning Audio Visual Products