ENGLISH

How to use the MODE (M) button:

If you press MODE (M), the unit goes into functions mode and the number, 4/¢ and DISP (D) work as different function buttons.

During functions mode:

MODE

Time countdown indicator lights up

To use these buttons for their original function (ex. as the number buttons) again after pressing

MODE (M), wait for 5 seconds without pressing any of these buttons until the functions mode is cleared.

• Pressing MODE (M) again also clears the functions mode.

How to change the display patterns:

This unit is equipped with two display indication patterns – with or without the source symbol animation.

To change the display patterns, press MODE (M), then press DISP (D) within 5 seconds. Each time you press DISP (D), the display patterns change as follows.

Ex.: While receiving an FM station.

(Initial setting)

Note:

The display ilustrations used in this manual are with the source symbol animations and with “CLOCK” set “ON” (see page 32).

CAUTION on Volume Setting

CDs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a disc and adjust it as required during playback.

4

Page 4
Image 4
JVC KD-SH707 manual How to change the display patterns, Time countdown indicator lights up