34
ENGLISH
To turn the auxiliary input switch on or off

– AUX IN

You can switch the auxiliary input off when no
external component is connected to the MP3
INPUT jack.
When shipped from the factory, the auxiliary input
switch is set to “ON.”
• ON: You can select “AUX INPUT
(AUX)” as the playback source.
• OFF: You cannot select “AUX INPUT
(AUX)” as the playback source.
To select the target component to operate
through this receiver – KEY SEL

(For KD-SH909 only)

You can operate either JVC’s DVD player or VCR
through this receiver, by using the number
buttons on the control panel.
When shipped from the factory, these number
buttons are set to be used for the DVD
operations.
• DVD: To operate a JVC DVD player.
• VCR: To operate a JVC VCR.
• OFF: Not to use the number buttons for
operating other components.
To use these number buttons on the control panel
for DVD or VCR operations, see pages 38 and 39.
To change the FM tuner selectivity

– IF FILTER

In some areas, adjacent stations may interfere
with each other. If this interference occurs, noise
may be heard. This unit has been preset to
automatically reduce this interference noise
(“AUTO”) when shipped from the factory.
• AUTO: When this type of interference occurs,
this unit automatically increases the
tuner selectivity so that interference
noise will be reduced. (But the stereo
effect will also be lost.)
• WIDE: Subject to the interference from
adjacent stations, but sound quality
will not be degraded and the stereo
effect will not be lost.
To turn the tag display on or off – TAG DISP
An MP3 file can contain file information called
“ID3 Tag” where its album name, performer, track
title, etc. are recorded.
There are two versions–ID3v1 (ID3 Tag version 1)
and ID3v2 (ID3 Tag version 2). This unit is
compatible only with ID3v1.
When shipped from the factory, “ON” is selected.
• ON: Turns on the ID3 tag display while
playing MP3 files.
• If an MP3 file does not have ID3
tags, directory name and file name
appear.
Note:
If you change the setting from “OFF” to
“ON” while playing an MP3 file, the tag
display will be activated when the next
file stars playing.
• OFF: Turns off the ID3 tag display while
playing MP3 files. (Only the directory
name and file name can be shown.)
EN30-37SH909_707[J]f.pm5 17/1/02, 11:33 AM34