ENGLISH

EXTERNAL COMPONENT OPERATIONS

MP3 player, MD player, etc.

EB

 

 

 

 

E-BASS

DISP

BAND

MODE

 

 

 

 

MP3

MP3 INPUT*

 

 

 

INPUT

* This MP3 INPUT is not compatible with digital signals.

Playing external components

For KD-SH909:

You can connect two external components to this unit.

Connect one to the MP3 INPUT jack on the control panel, and the other to the LINE IN plugs on the rear.

To use the external component connected to LINE IN plugs on the rear, set “LINE IN” to “ON” (see page 33).

To use the external component connected to the MP3 INPUT jack on the control panel, set “AUX IN” to “ON” (see page 34).

You can connect a JVC DVD player or VCR to the LINE IN plugs.

You can operate a JVC DVD player or VCR through this receiver using the number buttons on the control panel.

When you operate the VCR, you have to change the operation mode of the number buttons from the DVD operation mode to the VCR operation mode. (See “To select the target component to operate through this receiver – KEY SEL” on page 34.)

1 Select the external component—AUX INPUT (AUX) or LINE INPUT (LINE).

When you select a source, the power automatically comes on.

Each time you press the button, the source changes as described on page 8.

AUX INPUT (AUX): To select the component connected to the MP3 INPUT jack on the control panel

LINE INPUT (LINE): To select the component connected to the LINE IN plug

2 Turn on the connected component and start playing the source.

If connecting a JVC’s DVD player or VCR, you can perform the following operations.

38

Page 38
Image 38
JVC KD-SH707 manual For KD-SH909, MP3 player, MD player, etc