JVC KD-SH707 manual Troubleshooting, Symptoms Causes Remedies

TROUBLESHOOTING

ENGLISH

What appears to be trouble is not always serious. Check the following points before calling a service

center.

		Symptoms	Causes	Remedies
	•	Sound is sometimes	Contents on the disc are not	Change the disc.
		interrupted.	compatible with the unit.
			You are driving on rough	Stop playback while driving on
			roads.	rough roads.
			Disc is scratched.	Change the disc.
	•	Sound cannot be heard	Connections are incorrect.	Check the cords and
		from the speakers.		connections.
			The volume level is set to the	Adjust it to the optimum level.
			minimum level.
			The “P.AMP SW” setting is set	Set it to “ON” (see page 32).
			to “OFF.”
Playback
	• CD-R/CD-RW cannot be		CD-R/CD-RW is not finalized.	• Insert a finalized
		played back.		CD-R/CD-RW.
	• Tracks on the CD-R/CD-			• Finalize the CD-R/CD-RW
General		RW cannot be skipped.	The unit may function	with the component which
	• “NO DISC” or “EJECT ERR”			While pressing		, press and
				you used for recording.
				hold 0 for more
		appears on the display and	incorrectly.		than 2 seconds.
		disc cannot be ejected.		(Be careful not to drop the disc
	•	No message appears on the		when ejecting.)
		display but disc cannot be
		ejected.
	•	When “ERR 00” to “ERR 44”	There is something blocking	Press the reset button on the
		appears on the display.	the control movement.	front panel. (See page 2.) If the
				reset button does not work,
				check the Installation/Connection
				Manual (separate volume). (Ex.:
				You have used a longer screw
				than specified.)
	•	This unit or CD changer	The built-in microcomputer	Press the reset button on the
		does not work at all.	may function incorrectly due to	control panel. (See page 2.)
			noise, etc.
	•	SSM (Strong-station	Signals are too weak.	Store stations manually.
		Sequential Memory)
FM/AM		automatic preset does not
		work.
	•	Static noise while listening	The antenna is not connected	Connect the antenna firmly.
		to the radio.	firmly.

44