JVC manual For KD-SH707, When connecting a DVD player, When connecting a VCR

When connecting a DVD player:		1 Select the external component—AUX
3:	: Turns on and off the power.	INPUT (AUX) or LINE INPUT (LINE).
	Starts playback.	When you select a
Á:	• Fast-forwards the chapter when pressed	source, the power
	and held.	automatically comes on.
	• Skips to the beginning of the next chapter	Each time you press the
		button, the source
	when pressed briefly.
		changes as described on
1:	• Reverses the chapter when pressed and
		page 8.
	held.
	• Goes back to the beginning of the current
	chapter when pressed briefly.
	Goes back to the beginning of the	AUX INPUT (AUX): To select the
	previous chapter when pressed
		component connected
	consecutively.
		to the MP3 INPUT jack
7:	Stops operations.
		on the control panel

Note:

When you press the above buttons, the display shows “DVD” and its operation mode (such as 3, 7 ).

ENGLISH

When connecting a VCR:

: Turns on and off the power.

3: Starts playback.

Á: Fast-winds a tape when pressed.

1: Rewinds a tape when pressed.

7: Stops operations.

Note:

When you press the above buttons, the display shows

“VCR” and its operation mode (such as 3, 7).

For KD-SH707:

You can connect two external components to this unit.

Connect one to the auxiliary input jack on the control panel, and the other to the CD changer jack on the rear.

•To use the external component connected to the CD changer jack on the rear, set “EXT IN” to “LINE INPUT” (see page 33).

•To use the external component connected to the auxiliary input jack on the control panel, set “AUX IN” to “ON” (see page 34).

LINE INPUT (LINE): To select the component connected to the LINE IN plug

•If “LINE INPUT” cannot be selected, see page 33 and set “EXT IN” to “LINE INPUT”. This cannot be used together with the CD changer.

2 Turn on the connected component and start playing the source.

39