JVC TK-C1460 Output of Black-White/Color switching signal, E-40,  Set the B&W Item to AUTO, Memo

Output of Black-White/Color switching signal

It is possible to output black-White/color switching signal from the AUX terminal on the back of this unit.

		 Set the B&W Item to AUTO.
MENU button SET button		1.	Select the B&W/COLOR MODE item on
		2.	the ALC SETTING screen.
			Press the SET button.
SET	SETUP		The B&W/COLOR MODE screen
			appears.
	CAMERA
AWC		3.
MENU			Press either the	button or the
		4.	button and select the B&W item.
			Press either the	button or the
		5.	button and set to “AUTO”.
			Upon completion of setting, press the
			MENU button twice.
			Then, the MAIN MENU screen is
			brought back.

B&W/COLOUR MODE

B&W	AUX
L E V E L	NORMAL

Set the AUX TERMINAL Item to B&W OUT.

MODE S EL E C T

CAMERA T I T L E ED I T . .

RE V ERS E MODE	OF F
AL M . T I T L E S I Z E	D OUBLE
AL A RM COLOUR	WH I T E
AU X T E R M I N A L	B&W OUT
D . Z O O M M A X	x2

CAUTION:

When you use near infrared ray illumi- nations, use a lens that is compatible with the near infrared ray illuminations. Any lens other than the compatible one can result in out-of-focus due to such characteristics.

1. Select MODE SELECT on the MAIN MENU screen.

2. Press the SET button.

The MODE SELECT screen appears.

3. Press either the button or the button and select the AUX TERMINAL item.

4. Press either the button or the button and set to ”B&W OUT”.

5. Upon completion of setting, press the MENU button twice.

•Then, the normal screen is brought back.

MEMO

•When you use infrared illumination, if the subject excessively reflects, a B/W screen can switch to a color screen.

To perform switching with higher accuracy, we recommend that you use it by the setting mentioned in [Control by Black-White/Color Switching Signal From the Outside], referring to Page 41.

E-40