JVC TK-C1460 manual Introduction, Controls, Connectors and Indicators, Lens mount

INTRODUCTION

Controls, Connectors and Indicators

2

13

7 6

4

5

1Lens mount

This means to attach the lens.

This is applicable to both the C-mount lenses and CS-mount lenses.

2Back focus adjustment ring Adjusting the back focus during lens installation.

When readjustment is required, loosen the locking screw 3 by turning it counterclockwise and turn the back focus adjustment ring 2 .

After the adjustment, tighten the locking screw 3 again.

3[BF LOCK] Back focus locking screw This serves to fix the back focus-adjusting ring.

4Camera-mounting bracket

The bracket has been attached on the bottom of the camera before shipment. It can also be attached on the top according to the circumstance.

To re-attach the bracket use the threaded holes at the top, with the camera mounting bracket fixing screws 7 .

5Camera-mounting screw hole (1/4 -20UNC)

Use this hole when mounting the camera onto a fixer, pan/ MAX. tilt unit, and the like. (Use a 7mm screw shorter than 7 mm.)

6Rotation-preventive hole

Make use of this rotation-preventive hole to prevent any fall when mounting the camera. Make sure that the camera is securely mounted.

7Camera mounting bracket fixing screws (⋅ 2: M2.6 ⋅ 6 mm)

Be sure to use a 6 mm long screw.

E-8