JVC TK-C1460 Mounting the camera, E-18, Connection/Installation, M3 x 6mm, Fall Prevention, Video

CONNECTION/INSTALLATION

Mounting the camera

Camera mounting screw hole

When mounting the camera on a fixer, pan/ tilt, etc., use the camera mounting screw hole located on the camera-mounting bracket.

Camera-mounting bracket

CAUTION:

Use the screw with a length shorter than 7mm from a camera-mounting

face.MAX.

7mm

Furthermore, make use of the rotation

Rotation prevention holeprevention hole to prevent the camera from falling and securely mount the camera. Special precautions must be taken for mounting the camera on a wall or a ceiling. We are not liable for any damage caused by improper installation.

6mm

2mm

		-
DC12V	AC24V	+	POWERISOLATEDONLY	(E TYPE)	A
		ONLY(U2CLASSTYPE)
		2
		1

				- RX+ RX- AUX		GND
			TX+ TX
				C	D
			B
					Y/C OUT
							T-
			OUT		SEE INS
		VIDEO				TION
SYNC	IN				MANUA
POWER							M3 x 6mm

Fall Prevention

•Exercise maximum caution when installing the unit to the wall or ceiling. You should not engage in the installation work yourself. Ask a professional to do the job, since the fall of the unit can result in injuries and accidents.

•When installing the unit on a fixer, Pan/ Tilt unit, etc., make sure to install it firmly using a rotation-preventing hole provided to prevent fall.

•To prevent fall, connect the unit to a section with sufficient strength (ceiling slab or channel) using a fall prevention wire such as a wire chain and the like. Use the screw hole on the back of the unit for installation.

Pay utmost attention to the length of the wire, too.

•Specified screw (M3 ⋅ 6 mm)

Never use any screw longer than the specified length as the inside can be damaged.

E-18