JVC TK-C1460 manual Introduction, Features

INTRODUCTION

Features

A new DSP (Digital Signal Processor) features a Extended Dynamic Range (ExDR) and enables to shoot both bright and dark locations.

The use of a new CCD with a SENSE UP (X32) function realized the minimum luminous flux density for subject of 0.8 lx (F1.2, 50%, AGC 20dB) and 0.025 lx (at SENSE UP (X32)). Furthermore, we realized 0.03 lx (F1.2, 50% AGC 20dB) thanks to the function of B/W mode.

A motion detector function detects the motion inside an image and emits alarm signals.

The equipped Y/C terminals and RS- 422A/RS-485 terminals allow intended compatibility with diversified systems.

Day/Night surveillance

When the light is low, the camera pictures can be switched automatically to black and white pictures.

Before starting an important recording, be sure to perform a test recording in order to confirm that a normal recording is possible.

We do not accept liability for the loss of a recording in the case of it becoming impossible to record due to a problem in the video camera, VCR or video tape.

We do not accept liability for any damage to the camera in cases when it is dropped because of incomplete installation due to not observing the installation instructions correctly. Please be careful when installing the camera.

The motion detector is not a feature to prevent theft, fire, etc. Even if an accident should occur resulting in damage, we do not accept any liability.

Electronic zoom

The 10x electronic zoom allows monitoring in far greater detail.

Characters and symbols used in this instruction manual.

CAUTION : Cautionary notes concerning operation of the unit.

MEMO : Reference such as restrictions of features, etc.

: Reference page or item.

E-6