JVC TK-C1460 manual VIDEO ADJUST Screen, E-31, Functions and set values, Initial value, Memo

VIDEO ADJUST Screen

Adjustments are made on video signals.

Item		Functions and set values				Initial value
WHITE	Selects the white balance adjustment function. The white					ATW
BALANCE	balance can be adjusted manually or automatically for
	light within the colour temperature range of 2500K to
	8000K.
	• ATW:	Auto-Tracking White Balance mode.
		This automatically adjusts the white balance.
	• AWC:	Auto White Balance Controll mode. When the
		SET button is pressed, the adjustment
		screen appears.
	MEMO	( See page 37.)
	The “- - -” will appear during operation in the black-and-
	white mode and any setting cannot be changed.
COLOUR	To adjust the colour level of the video signal.					NORMAL
LEVEL	• To make colours lighter …			Decrease the value
	• To make colours darker …			Increase the value
	[Set values: –5 to NORMAL to 5]
	MEMO
	The “- - -” will appear during operation in the black-and-
	white mode and any setting cannot be changed.
ENHANCE	To adjust the contour enhancing level of the video signal.					NORMAL
LEVEL	• To make the picture quality harder …				Increase the value
	• To make the picture quality softer …				Decrease the value
	[Set values: –5 to NORMAL to 5]
PEDESTAL	To adjust the pedestal level of the video signal.					NORMAL
LEVEL	• To brighten picture …		Increase the value
	• To darken picture …		Decrease the value
	[Set values: –5 to NORMAL to 5]
AUTO	This is set when it is difficult to view a dark part of the					OFF
BLACK	image even if gain is boosted by the AGC (automatic gain
CTL	control).
	ON: When a black level of the image signal is low, a
	pedestal level that becomes the standard of black
	is automatically elevated, making it easier to view a
	dark part.
	OFF: AUTO BLACK does not function.
	MEMO
	• When PEDESTAL LEVEL is set to 5, no function can
	take place even if AUTO BLACK CTL is ON.
	• When AGC MODE is set to OFF, no function can take
	place even if AUTO BLACK CTL is ON.

E-31