Operating this unit
3Touch c or d to adjust the equalizer curve.
+6 to
curve is increased or decreased.
# The actual range of the adjustments are differ- ent depending on which equalizer curve is se-
lected.
# The equalizer curve with all frequencies set to
0cannot be adjusted.
Adjusting 7-band graphic equalizer
For CUSTOM1 and CUSTOM2 equalizer curves, you can adjust the level of each band.
!A separate CUSTOM1 curve can be cre- ated for each source. If you make adjust- ments when a curve other than CUSTOM2 is selected, the equalizer curve settings will be memorized in CUSTOM1.
!A CUSTOM2 curve can be created com- mon to all sources. If you make adjust- ments when the CUSTOM2 curve is selected, the CUSTOM2 curve will be up- dated.
1Touch GRAPHIC EQ on the audio func- tion menu.
2Touch c or d to select an equalizer curve.
SUPER BASS
3Touch c or d to select the equalizer band to adjust.
4Touch a or b to adjust the level of the equalizer band.
+12dB to
creased or decreased.
# You can then select another band and adjust the level.
Section
03
Adjusting loudness
Loudness compensates for deficiencies in the |
| ||
low- and | Operating | ||
1 | Touch LOUDNESS on the audio function | ||
| |||
menu. | this | ||
2 | Touch d to turn loudness on. | ||
| |||
# To turn loudness off, touch c. | unit | ||
3 | Touch c or d to select a desired level. | ||
|
LOW
Using subwoofer output
This unit is equipped with a subwoofer output which can be turned on or off.
!When the subwoofer output is on, you can adjust the
1Touch SUB WOOFER on the audio func- tion menu.
2Touch d next to SUB WOOFER to turn
subwoofer output on.
# To turn subwoofer output off, touch c.
3Touch c or d next to PHASE to select the phase of subwoofer output.
Touch d to select normal phase and NORMAL appears in the display. Touch c to select reverse phase and REVERSE appears in the display.
4Touch c or d next to FREQUENCY to se- lect
Each time you touch c or d selects
Only frequencies lower than those in the se- lected range are outputted from the subwoo- fer.
En 35