Available accessories
2Touch SEARCH to search for available cellular phones.
While searching, SEARCHING flashes. When available cellular phones featuring Bluetooth wireless technology are found, device names or Name Not Found (if names cannot be ob-
tained) are displayed.
# If this unit fails to find any available cellular
phones, NOT FOUND is displayed.
# You can display the BD address by touching BD ADDR. To return to the device name, touch
PHONE NAME.
3Touch the device name you want to connect.
While connecting, CONNECTING flashes. To complete the connection, please check the de- vice name (Pioneer BT unit2) and enter the link code on your cellular phone. If the con- nection is established, CONNECTED is dis-
played.
# The link code is set to 0000 as default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 43.
Using a cellular phone to initiate a connection
1Touch PHONE CONNECT on the function menu.
2Touch CONNECTION OPEN. CONNECTION WAITING flashes and the unit is now on standby for connection from cellular phone.
3Use cellular phone to connect to this
unit.
# To cancel this function, touch
CONNECTION OPEN again.
# The link code is set to 0000 as default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 43.
Section
04
Disconnecting a cellular phone
1 Touch PHONE CONNECT on the function menu.
2 Touch DISCONNECT to disconnect the | Available | |
currently connected cellular phone from | ||
| ||
this unit. |
| |
After the disconnection is completed, |
| |
NO CONNECTION is displayed. | accessories | |
phone | ||
Registering connected cellular |
|
1Touch PHONE REGISTER on the function menu.
Registration assignments for user phone 1, 2 and 3 appear on the display.
2Touch and hold one of the registration assignments to register the currenctly con- nected phone.
If the registration is succeeded, the device name of the connected phone is displayed in
the selected assignment.
# If the assignment is empty, the device name is not displayed. If the assignment is already taken, the device name appears. To replace an assign- ment with a new phone, first delete the current assignment. For more detailed instructions, see
Deleting a registered phone on this page.
# If the registration failed, device name of the connected phone is not displayed in the selected assignment. In this case, return to step 1 and try again.
Deleting a registered phone
1Touch PHONE REGISTER on the function menu.
En 65