Section
03 
Operating this unit
1Touch the screen to activate the touch panel keys corresponding to each source. The touch panel keys appear on the display.
#To go to the next group of touch panel keys, touch NEXT.
#To return to the previous group of touch panel keys, touch PREV.
2Touch HIDE to hide the touch panel keys.
Note
If you do not use the touch panel keys within 30 seconds, they will be hidden automatically when selecting video sources.
Operating the menu
1 2 3
4
1FUNCTION MENU key
Touch to select functions for each source.
2AUDIO MENU key
Touch to select various sound quality controls.
3SYSTEM MENU key
Touch to select various setup functions.
4ESC key
Touch to cancel the control mode of func- tions.
1 Touch A.MENU to display MENU.
The menu names are displayed and operable ones are highlighted.
#When A.MENU is not displayed, you can dis- play it by touching the screen.
2Touch the desired key to display the
function names you want to operate.
# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function names, touch PREV.
3Touch ESC to return to the display of each source.
Opening and closing the LCD panel
The LCD panel will be opened or closed auto- matically with the turning of the ignition switch on or off. You can turn off the automatic close/open function. (Refer to page 48.)
!Do not close the LCD panel with hands by force. That cause malfunction.
!The automatic close/open function will op- erate the display as follows.
—When the ignition switch is turned OFF while the LCD panel is opened, the LCD panel will close after six seconds.
—When the ignition switch is turned ON again (or turned to ACC), the LCD panel will be opened automatically.
—Removing or attaching the front panel will automatically close or open the LCD panel. (Refer to page 13.)
!When the ignition switch is turned OFF after the LCD panel has been closed, turn- ing the ignition switch ON again (or turning it to ACC) will not open the LCD panel. In this case, press OPEN/CLOSE to open the LCD panel.
!When closing the LCD panel, check to make sure that it has closed completely. If the LCD panel has stopped halfway, leaving it like this could result in damage.
18
En
