Pioneer AVH-P5900D operation manual Additional Information Troubleshooting

Appendix

Additional Information

Troubleshooting

Common

Symptom	Cause	Action (See)
Power doesn’t turn on.	Leads and connectors are incor-	Confirm once more that all connections are
The unit doesn’t operate.	rectly connected.	correct.
	The fuse is blown.	Rectify the reason for the fuse blowing, then
		replace the fuse. Be very sure to install the
		correct fuse with the same rating.
	Noise and other factors are causing	Press RESET. (Page 14)
	the built-in microprocessor to oper-
	ate incorrectly.

Additional

Operation with the remote con- trol isn’t possible.

The unit does not operate cor- rectly even when the appropriate remote control buttons are pressed.

The remote control operation mode Switch to the correct remote control mode. is incorrect.

The remote control code is incor-	Make sure the remote control selection
rect.	switch setting and code type setting are the
	same.
Battery power is low.	Load new battery.
Some operations are prohibited	Check by using another disc.
with certain discs.

Information

Playback is not possible.	The disc is dirty.	Clean disc. (Page 94)
	The loaded disc is a type this unit	Check what type the disc is.
	cannot play.

	Non compatible video system disc	Change to a disc compatible to your video
	is loaded.	system.
No sounds are heard.	Cables are not connected correctly.	Connect the cables correctly.
The volume level will not rise.
	The unit is performing still, slow mo-	There is no sound during still, slow motion or
	tion or frame-by-frame playback.	frame-by-frame playback.
There is no picture.	The parking brake cord is not con-	Connect a parking brake cord, and apply the
	nected.	parking brake.
	The parking brake is not applied.	Connect a parking brake cord, and apply the
		parking brake.

The icon is displayed, and op- eration is not possible.

The operation is prohibited for the	This operation is not possible.
disc.

The operation is not compatible with the disc’s organization.

This operation is not possible.

The picture stops (pauses) and	Reading of data has become impos-	After stopping playback once, start playback
the unit cannot be operated.	sible during playback.	once more.
There is no sound.	The volume level is low.	Adjust the volume level.
Volume level is low.
	The attenuator is on.	Turn the attenuator off.
There is audio and video skip-	The unit is not firmly secured.	Secure the unit firmly.
ping.
The picture is stretched, the as-	The aspect setting is incorrect for	Select the appropriate setting for your display.
pect is incorrect.	the display.	(Page 39)

En 89