Section
03 Operating this unit
Correcting distorted sound
You can minimize distortion that may be caused by the equalizer curve settings. Setting an equalizer level high can cause dis- tortion. If high sound is crippled or distorted, try switching to LOW. Normally, leave the set- ting at HIGH to ensure quality sound.
!Only when the
1Touch NEXT on the initial menu.
2Touch DIGITAL ATT to switch the digital attenuator setting.
Touch DIGITAL ATT repeatedly until the de- sired setting appears in the display.
!HIGH – High quality sound
!LOW – Minimize distortion sound
Resetting the audio functions
You can reset all audio functions except vo- lume.
!Only when the
1Touch NEXT on the initial menu.
2Touch AUDIO RESET.
3Touch RESET.
4Touch RESET again to reset audio func-
tions.
# To cancel resetting the audio functions, touch
CANCEL.
Other Functions
Introduction of system adjustments
1
1System menu display
Shows the system function names.
1Touch A.MENU and then touch SYSTEM MENU to display the system func- tion names.
The system function names are displayed and
operable ones are highlighted.
# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function names, touch PREV.
2Touch ESC to return to the display of
each source.
# To return to the previous display, touch BACK.
Changing the wide screen mode
You can select a desired mode for enlarging a 4:3 picture to a 16:9 one.
1Touch WIDE MODE on the system menu.
2Touch the desired wide mode setting.
3Touch ESC to hide the touch panel keys.
FULL (full)
A 4:3 picture is enlarged in the horizontal direc- tion only, giving you a 4:3 TV picture (normal pic- ture) without any omissions.
44 En