Universal Electronics C6 To Program a Macro, To Delete a Macro, Press Cable device mode key

Kameleon C6_v10.qxd 5/14/03 9:16 AM Page 21

ADVANCED OPTIONS

TO PROGRAM A MACRO

1.Press Cable device mode key.

2.Press Setup for at least 3 seconds. The bot- tom of the IR indicator will blink twice.

3.Press 9 9 5 on the keypad. The bottom of the IR indicator will blink twice.

4.Press VOD key.

5.Press Cable Device mode key followed by 0-0-1.

6.Lastly, to save the Macro, press Setup for at least 3 seconds. The bottom of the IR indicator will blink twice.

Now, whenever you press the programmed custom VOD key, the Kameleon-C6 Remote will tune the cable converter to channel 001.

REMEMBER

•EACH MACRO CAN CONSIST OF A MAXIMUM OF 15 KEYSTROKES.

•YOU CAN COMBINE A LEARNED KEY IN A MACRO SEQUENCE, CREAT-

ING AN EVEN MORE PERSONALIZED KAMELEON-C6 REMOTE. (IF A LEARNED FUNCTION USED IN A MACRO IS SUBSEQUENTLY DELETED, THE MACRO WILL REVERT TO THE KEY’S ORIGINAL FUNCTION.)

•TO INCLUDE A FUNCTION FROM A PARTICULAR SCREEN IN A DEVICE MODE, USE THE SCROLL KEY.

•MAKE SURE THAT YOU PROGRAM A MACRO ON A SPARE KEY THAT YOU DON’T USE IN ANY DEVICE MODE.

•ONCE YOU PROGRAM A MACRO ON A SPECIFIC KEY, THE SEQUENCE WILL WORK REGARDLESS OF THE DEVICE MODE YOU ARE IN. THIS MEANS THAT THE FUNCTION ORIGINALLY PROGRAMMED ON THAT SPE-

CIFIC KEY WILL BE OVERWRITTEN.

•TO AVOID ACCIDENTAL RECORDINGS, YOU MUST PRESS THE RECORD KEY ON YOUR KAMELEON-C6 REMOTE TWICE TO RECORD. PLEASE NOTE THAT IF YOU ASSIGN A MACRO TO THE RECORD KEY, YOU WILL DE-ACTIVATE THE DOUBLE KEY PRESS– THEREFORE WE DO NOT REC-

OMMEND ASSIGNING A MACRO TO THIS KEY.

•IF YOU HAD TO HOLD DOWN A KEY FOR A FEW SECONDS ON THE ORIGINAL REMOTE CONTROL TO GET A FUNCTION, THIS FUNCTION MAY NOT WORK IN A MACRO ON YOUR KAMELEON-C6 REMOTE.

•A KEY THAT IS PROGRAMMED WITH A MACRO WORKS IN ANY DEVICE MODE INCLUDED ON THAT MACRO.

You can delete a Macro for any of the keys that were assigned a macro.

TO DELETE A MACRO

1.Press Setup for at least 3 seconds. The bot- tom of the IR indicator will blink twice.

2.Press 9 9 5 on the keypad. The bottom of the IR indicator will blink twice.

3.Press the desired custom Macro key.

4.Press Setup for at least 3 seconds. The bot- tom of the IR indicator will blink twice.

Manufacturer Codes Glossary\Trouble Shooting Advanced Options Programming Remote Batteries\Keypad Overview Introduction

Creating Other Macros 21