Universal Electronics C6 Installing Batteries, To Install Batteries, About Replacing Batteries

Kameleon C6_v10.qxd 5/14/03 9:16 AM Page 4

KAMELEON-C6 REMOTE

Installing Batteries

Your Kameleon-C6 Remote requires batteries. Four AAA alkaline batteries are included so you can immediately enjoy your Kameleon-C6 Remote.

ABOUT REPLACING BATTERIES

•Use only new batteries of the required size and recommended type.

•Do not mix old and new batteries, different types of batteries (e.g. standard, alkaline or rechargeable), or rechargeable batteries of differ- ent capacities.

•If you do not plan to use the remote for an extended period of time, remove the batteries. Batteries can leak chemicals that can destroy elec- tronic parts.

•Dispose of old batteries promptly and properly.

•Do not burn or bury them.

Replace your batteries when one of the follow- ing conditions occurs:

•The bottom segment of the IR indicator blinks 5 times after each keypress.

•The remote no longer responds to movement.

TO INSTALL BATTERIES

1.Unscrew and remove the battery cover from the back of your Kameleon-C6 Remote.

2.Match the batteries to the “+” and “-” marks inside the battery case, then insert the batteries accordingly.

3.Reposition the battery cover and tighten the screw.

REMEMBER

•YOUR KAMELEON-C6 REMOTE HAS PERMANENT MEMORY RETENTION. REMOVING THE BATTERIES WILL NOT REQUIRE YOU TO REPROGRAM THE REMOTE.

•YOUR KAMELEON-C6WILL “SLEEP” (TURN OFF) AFTER 7 SECONDS OF INACTIVITY TO CONSERVE THE BATTERIES. PICKING UP THE REMOTE OR PRESSING ANY KEY WILL TURN ON THE REMOTE AND THE KEYPAD BACK-

LIGHT.

•THE FIRST TIME YOU INSTALL BATTERIES, YOU WILL NEED TO PRESS THE TOUCH-PANEL TO ACTIVATE THE REMOTE CONTROL.

4 Installing Batteries