Kameleon C6_v10.qxd 5/14/03 9:16 AM Page 23
TROUBLE SHOOTING
Trouble Shooting
Problem: No icons or keys light up when you press a key.
Solution: Replace the batteries with new 4 AAA Alkaline Batteries.See“Installing Batteries”on page 4.
Problem: Device mode key blinks when you press a key, but home entertainment device does not respond.
Solution: Make sure you are aiming your
Problem: My
Solution: Try all listed device manufacturer codes. Make sure all devices can be operated with an infrared remote control.
Problem: TV/VCR Combo does not respond properly.
Solution: Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for full operation.
Problem: There is no volume on the second TV.
Solution: Follow the instructions in “Volume Lock and Unlock” on page 15.
Problem: CH+, CH- and LAST do not work on my RCA TV.
Solution: Due to RCA design (1983
Problem: Tried “Searching for Your Device’s Manufacturer Code” and still could not find a working device code.
Solution: Clear out the device mode key and then try “Searching for Your Device’s Manufacturer Code” on page 12 again.
TO CLEAR THE DEVICE MODE KEY
1.Press Setup for at least 3 seconds. The IR indi- cator will blink twice.
2.Press 9 9 2 on the keypad. The bottom of the IR indicator will blink twice.
3.Lastly, press the desired device mode key.
4.Lastly, press the same device mode key.
Problem:
See “Programming Your
Manufacturer Codes Glossary\Trouble Shooting Advanced Options Programming Remote Batteries\Keypad Overview Introduction
Trouble Shooting 23