Universal Electronics C6 owner manual Creating the Power Macro, Creating Other Macros

Kameleon C6_v10.qxd 5/14/03 9:16 AM Page 20

KAMELEON-C6 REMOTE

Creating the Power Macro

You can program the Power key on your Kameleon-C6 Remote to turn on and off multiple devices at the same time. You can command up to six devices with one press of your Power key!

TO PROGRAM THE MACRO FOR THE

POWER KEY

1.Press the Cable device mode key.

2.Press Setup for at least 3 seconds. The bottom of the IR indicator will blink twice.

3.Press 9 9 5 on the keypad. The bottom of the IR indicator will blink twice.

4.Press the Power key.

5.Press the mode key for the first device that you want to program, followed by the mode keys for each device you want to command (up to six devices).

6.Lastly, press Setup for at least 3 seconds. The bottom of the IR indicator will blink twice.

Creating Other Macros

In addition to programming the Power key as a Macro, you can program other custom keys on your Kameleon-C6 Remote to conveniently per- form a sequence of commands at the press of one button. For example, if your cable system has a VOD service that has information available on channel 0-0-1, you can program the VOD key to tune to this channel with one key press.

You can install a Macro on any key, except for the Setup key and the devices mode keys (TV, CBL, DVD, AUX,VCR, and Audio).

20 Creating the Power Macro