Pioneer AVH-P5900D Operating this unit, Changing the picture adjustment, JUST just

Operating this unit

JUST (just)

The picture is enlarged slightly at the center and the amount of enlargement increases horizontally to the ends, enabling you to enjoy a 4:3 picture without sensing any disparity even on a wide screen.

CINEMA (cinema)

The picture is enlarged by the same proportion as FULL or ZOOM in the horizontal direction and by an intermediate proportion between FULL and ZOOM in the vertical direction; ideal for a cine- ma-sized picture (wide screen picture) where cap- tions lie outside.

ZOOM (zoom)

A 4:3 picture is enlarged in the same proportion both vertically and horizontally; ideal for a cine- ma-sized picture (wide screen picture).

NORMAL (normal)

A 4:3 picture is displayed as it is, giving you no sense of disparity since its proportions are the same as that of the normal picture.

Notes

!Different settings can be memorized for each video source.

!When video is viewed in a wide screen mode that does not match its original aspect ratio, it may appear different.

!Remember that using the wide mode feature of this system for commercial or public view- ing purposes may constitute an infringement on the author’s rights protected by the Copy- right Law.

!Video will appear grainy when viewed in CINEMA or ZOOM mode.

Changing the picture adjustment

You can adjust BRIGHTNESS (brightness), CONTRAST (contrast), COLOR (color) and HUE (hue) for each source and rear view cam- era.

Section

03

! The adjustments of BRIGHTNESS and
CONTRAST are stored separately for light
ambient (daytime) and dark ambient (night-		Operating
time). A sun or moon	is displayed to
the left of BRIGHTNESS and CONTRAST,
respectively, as the ambient light sensor de-
termines brightness or darkness.
! You cannot adjust COLOR or HUE for the		this
audio source.
1 Touch PICTURE ADJUSTMENT on the		unit

system menu.

The adjustment function names are displayed.

2 Touch any of the following touch panel keys to select the function to be adjusted.

! BRIGHTNESS – Adjust the black intensity ! CONTRAST – Adjust the contrast

! COLOR – Adjust the color saturation

! HUE – Adjust the tone of color (red is em- phasized or green is emphasized)

! DIMMER – Adjust the brightness of display ! REAR VIEW CAMERA/SOURCE – Switch

the picture adjustment modes

#You cannot adjust the picture adjustment for rear view camera when CAMERA POLARITY is set to OFF. (Refer to Setting for rear view camera (back up camera) on page 47.)

#With some rear view cameras, picture adjust- ment may not be possible.

3Touch c or d to adjust the selected item.

Each time you touch c or d it increases or de- creases the level of selected item. +24 to –24 is displayed as the level is increased or de- creased.

4Touch ESC to hide the touch panel keys.

En 45