Operating this unit
Displaying your DivX® VOD registration code
In order to play DivX VOD (video on demand) content on this unit, you first need to register the unit with your DivX VOD content provider. You do this by generating a DivX VOD registra- tion code, which you submit to your provider.
1Touch NEXT on the DVD setup menu.
2Touch DivX VOD.
Your
!Make a note of the code as you will need it when you register with a DivX VOD provider.
Setting for digital output
Audio which is outputted from digital output of this unit can be selected. Normally, set to STREAM. If this unit’s digital output is not used, there is no need to change settings.
!Selecting Linear PCM enables you to switch the output channel if playing the dual mono mode DVD video discs. (Refer to Selecting audio output on page 30.)
1Touch NEXT on the DVD setup menu.
2Touch DIGITAL OUTPUT to select the de- sired digital output setting.
!STREAM – The Dolby Digital/DTS signal is output as it is (initial setting)
!Linear PCM – The Dolby Digital/DTS signal
is converted to and output as a linear PCM signal
Section
03
Initial Settings
Adjusting initial settings
Using the initial settings, you can customize Operating various system settings to achieve optimal per-
formance from this unit. 
thisunit
1
1Function display
Shows the function names.
1Touch the source icon and then touch OFF to turn this unit off.
2Touch the screen to display the touch panel keys.
3Touch A.MENU and then touch INITIAL MENU to display the function names.
The function names are displayed and oper-
able ones are highlighted.
# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function names, touch PREV.
4Touch ESC to return to the ordinary dis-
play.
# To return to the previous display, touch BACK.
En 
41
