Section
03Operating this unit
5Touch c or d next to LEVEL to adjust the output level of the subwoofer.
+6 to
Only frequencies higher than those in the se- lected range are outputted from the front or rear speakers.
Boosting the bass
Bass boost function boosts the bass level of sound lower than 100 Hz. The more the bass level is increased, the more the bass sound is emphasized and the entire sound becomes powerful. When using this function with the subwoofer, the sound under the
1Touch BASS BOOSTER on the audio function menu.
2Touch c or d to select a desired level.
0to +6 is displayed as the level is increased or decreased.
Using the high pass filter
When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are outputted from the front or rear speakers.
1Touch HPF on the audio function menu.
2Touch d next to HPF to turn high pass
filter on.
# To turn high pass filter off, touch c.
3Touch c or d next to FREQUENCY to se- lect
Each time you touch c or d selects
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of each source to prevent ra- dical changes in volume when switching be- tween sources.
!Settings are based on the FM volume level, which remains unchanged.
1Compare the FM volume level with the level of the source you wish to adjust.
2Touch NEXT on the audio function menu.
3Touch SLA.
4Touch c or d to adjust the source vo- lume.
Each time you touch c or d it increases or de- creases the source volume.
+4 to
Notes
!The AM volume level can also be adjusted with source level adjustments.
!Video CD, CD, compressed audio and DivX are set to the same source level adjustment volume automatically.
!XM tuner and SIRIUS tuner are set to the same source level adjustment volume auto- matically.
!External unit 1 and external unit 2 are set to the same source level adjustment volume automatically.
36 En