Pioneer AVH-P5900D Using the position selector, Available accessories, Using balance adjustment

Section

04 Available accessories

Using the position selector

One way to assure a more natural sound is to accurately position the stereo image, putting you right in the center of the sound field. The position selector function lets you automati- cally adjust the speaker output levels and in- serts a delay time to match the number and position of occupied seats. When used in con- junction with the SFC, the feature will make the sound image more natural and offer a pa- noramic sound that envelops you.

1Touch POSITION on the DSP function menu.

2Touch c/d/a/b to select a listening po- sition.

Touch one of these, c/d/a/b, to select a lis- tening position as listed in the table.

Key	Display	Position
c	FRONT-L	Front seat left
d	FRONT-R	Front seat right
a	FRONT	Front seats
b	ALL	All seats

#To cancel the selected listening position, touch the same key again.

Note

When you make adjustments to the listening po- sition, the speaker outputs are automatically set for appropriate levels. You can tailor the levels more precisely referring to Adjusting the speaker output levels using a test tone or Adjusting the speaker output levels.

Using balance adjustment

You can change the fader/balance setting so that it can provide you an ideal listening envir- onment in all occupied seats.

1Touch FADER/BALANCE on the DSP function menu.

2Touch a or b to adjust front/rear speaker balance.

Each time you touch a or b it moves the front/rear speaker balance towards the front or the rear.

FRONT:25 to REAR:25 is displayed as the front/rear speaker balance moves from front to

rear.

# FR: 0 is the proper setting when only two speakers are used.

3Touch c or d to adjust left/right speak- er balance.

Each time you touch c or d it moves the left/ right speaker balance towards the left or the right.

LEFT:25 to RIGHT:25 is displayed as the left/ right speaker balance moves from left to right.

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of each source to prevent ra- dical changes in volume when switching be- tween sources.

!Settings are based on the FM volume level, which remains unchanged.

1Compare the FM volume level with the level of the source you wish to adjust.

2Touch SLA on the DSP function menu.

3Touch c or d to adjust the source vo- lume.

Each time you touch c or d it increases or de- creases the source volume.

+4 to –4 is displayed as the source volume is increased or decreased.

78 En