JVC KD-LH1101 manual To adjust the display contrast level -Contrast, LCDType, English

To set the movie demonstration—Graphics

When shipped from the factory, the movie has been activated.

•All Demo: If no operation is done for about 20 seconds, the movie demonstration starts automatically.

•Int Demo: If no operation is done for about 20 seconds, the movie demonstration and playback source indication appears alternately on the

	display.
• Off:	Cancels the movie demonstration.

To select the source animation on the display—KeyIn CFM

When changing the source, the display shows the source animation. You can select the source animation on the display according to your preference.

•	Long:	A long source animation appears.
•	Short:	A short source animation appears.
•	Off:	Cancels the source animation.

To select the scroll mode for disc information and the DAB text—Scroll

You can select the scroll mode for disc information and for the DAB radio text (DLS: Dynamic Label Segment).

•Once: While showing the disc information: scrolls the disc information only once.

		While showing the DAB text: scrolls
		the detailed DAB text only once.
•	Auto:	While showing the disc information:
		repeats the scroll (in 5-second
		intervals).
		While showing the DAB text: scrolls
		the detailed DAB text.
•	Off:	While showing the disc information:
		cancels scroll mode.
		While showing the DAB text: shows
		only headline if any.

Note:

Even if the scroll mode is set to “Off,” you can scroll the display by pressing D (DISP) for more than one second.

To adjust the display contrast level

—Contrast

You can adjust the display contrast level among

1 to 10.

Adjust it to make the display indications clear and legible.

To select the display illumination pattern

—LCD Type

You can select the display illumination patterns according to your preference.

• Auto:	Positive pattern will be selected
	during the day time (depending on
	the “Dimmer” setting); on the other
	hand, negative pattern will be used
	during the night time (depending on
	the “Dimmer” setting).

•Positive: Positive (normal) pattern of the display.

•Negative: Negative pattern of the display.

To select the font on the display

—Font Type

You can change the font types used on the display. Select either “1” or “2” according to your

preference.

To turn the tag display on or off—Tag

This function takes effect only when JVC MP3-compatible CD changer is connected.

An MP3 file can contain file information called “ID3 Tag” where its album name, performer, track title, etc. are recorded.

There are two versions–ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag version 2). Only ID3v1 can be shown.

CONTINUED ON THE NEXT PAGE

ENGLISH

33