JVC KD-LH1101 manual External Component Operations, Select the external component Line CD Line

EXTERNAL COMPONENT OPERATIONS

Playing an external component

You can connect the external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied).

Preparation:

For connecting the Line Input Adapter KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

Before operating the external component, select the external input correctly, follow the procedure below.

•See also “Changing the general settings (PSM)” on pages 31 and 32.

1Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2Press number button 5 to select “AUDIO”— Audio category of the PSM settings.

3Press ¢ or 4 to select “Ext Input”*.

4Turn the control dial clockwise to select “Line In.”

5Press SEL (select) to finish the setting.

• For details, see “To select the external component to use—Ext Input” on page 34.

*Displayed only when one of the following sources is selected—FM, AM, and CD.

ENGLISH

Select the external component correctly,

follow the procedure below.

1 Select the external component (Line In).

CD Line In*

•If “Line In”* does not appear on the display, see page 34 and select the external input

(“Line In”) in the “Ext Input” setting.

*Displayed only when one of the following sources is selected—FM, AM, and CD.

Note on One-Touch Operation:

When you press CD/CD-CH, the power automatically

comes on. You do not have to press to turn on the power.

2 Turn on the connected component and start playing the source.

3 Adjust the volume.

4 Adjust the sound characteristics as you want. (See pages 27 – 29.)

Note:

You can also change the display pattern by pressing D (DISP) repeatedly.

47