JVC KD-LH1101 manual Storing your own sound, Adjustments

Storing your own sound	4 Make adjustments as you like.
adjustments

ENGLISH

You can adjust the sound modes to your preference and store your own adjustments in memory (User 1, User 2, and User 3).

•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

1)Press ¢ or 4 to select the frequency band—60 Hz, 150 Hz,

400 Hz, 1 kHz, 2.4 kHz, 6 kHz, 12 kHz.

1 Press SEL (select) once.

The next-step-operation buttons start flashing.

2)Press 5 (up) or ∞ (down) to adjust the level of the selected band within the range of –05 to +05.

3)Repeat steps 1) and 2) to adjust the other frequency bands.

Ex.: When you select “Country” previously

2 Select the sound mode you want to adjust.

•This unit has two sound mode selection screens. To move to the other screen, press 5 (up) or ∞ (down).

3 Enter the sound adjustment mode.

The following sound mode adjustment

screen appears on the

display.

5 Store the adjustment you made.

The confirmation message

appears—whether you want to store the adjustment.

If you want to cancel the adjustments,

press SEL (select).

•Adjustment you made remains effective until you select another sound mode.

6 Select one of the user sound modes (User 1, User 2, or User 3) you want to store into.

Ex.: When you select “User 1”

29