JVC KD-LH1101 manual Using PTY Standby Reception, To set PTY Standby Reception

Using PTY Standby Reception

PTY Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) from any source except AM stations.

To select your favorite PTY code for PTY Standby Reception

When shipped from factory, PTY Standby Reception has been set to work for searching for “News” programmes.

You can select your favorite programme type for PTY Standby Reception.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 31 and 32.)

2 Press number button 4 to select “TUNER”—Tuner category of the PSM settings.

The “PTY Stnby” (standby) setting screen appears on the display.

4 Finish the setting.

To set PTY Standby Reception

1Press M (MODE) while listening to an FM stereo broadcast.

“Mode” appears on the display. The next-step-operation buttons start flashing.

2Press number button 3 to activate PTY Standby Reception while “Mode” is still on the display.

Each time you press the button, PTY Standby Reception turns on and off alternately.

Ex.: When the currently selected PTY code for PTY Standby Reception is “News”

After about 5 seconds

ENGLISH

3 Select one of the twenty-nine PTY codes. (See page 21.)

Selected code name appears on the display

and is stored into memory.

The display returns to the source indication screen.

PTY indicator appears. (either lights up or flashes)

CONTINUED ON THE NEXT PAGE

17