JVC KD-LH1101 manual Changing the display color, Setting the desired color for each source, Line

ENGLISH

Changing the display color

You can set the display color using the PSM control. You can select your favorite color for each source (or for all sources).

You can also create your own colors, and set them as the display color.

Setting the desired color for each source

Once you have set the color for each source (or for all sources), the display illuminates in the selected color when the source is selected.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See pages 31 and 32.)

The next-step-operation

buttons start flashing.

2 Press number button 6 to select “COLOR”—Color category of the PSM settings.

The “All SRC” setting screen appears on the display.

3 Select the source—All SRC, CD, Changer (Line), FM, or AM—that you want to set the display color for.

All SRC*1		CD
AM	FM	Changer*2
		(Line)

*1 When you select “All SRC,” you can use the same color for all the sources.

*2 Selected only either component set in the “Ext Input” setting.

4 Select the display color.

As you turn the control

dial, the colors change as follows:

Every*1 O Aqua O Sky O Sea O Leaves OGrass O Red ORose O Amber O Honey O Violet O Cotton O Snow OUser*2 O (back to the beginning)

*1 When you select “Every,” the color changes every 2 seconds (changing to every color listed above except “User”).

*2 When you select “User,” the user-edited colors—“Day” and “Night” will be applied. (See page 37.)

5 Repeat steps 3 and 4 to select the color for each source (except when selecting “All SRC” in step 3).

6 Finish the setting.

36