JVC KD-LH1101 Sound Adjustments, Adjusting the sound, Make adjustments, Vol Adj, Canceled METER

	SOUND ADJUSTMENTS
Adjusting the sound		2 Make adjustments.

You can adjust the sound characteristics to your preference.

•“Vol Adj” setting is required for each source except FM. Before starting “Vol Adj,” select an appropriate source for which you want to make an adjustment.

1 Select the item you want to adjust.

The next-step-operation buttons start flashing. Each time you press SEL (select), the adjustable items change as follows:

iEQ Fad/Bal Vol Adj

Canceled METER

•For iEQ (sound mode) settings, see pages 28 and 29.

•For METER (level meter) settings, see page 30.

Indication	To do:	Range
Fad*	Adjust the front	R06 (Rear only)
	and rear speaker
	balance.	F06 (Front only)
Bal	Adjust the left	L06 (Left only)
	and right speaker
	balance.	R06 (Right only)
Vol Adj	Adjust and store	–12 (min.)
	the input level
	of each source.	+12 (max.)

*If you are using a two-speaker system, set the fader level to “00.”

•To adjust fader and balance—Fad, Bal: You can make these two adjustments at the same time, by referring to the indication on the display.

• Press 5 (up) or ∞ (down) to adjust the fader.

• Press ¢ or 4 to adjust the balance.

•To adjust the input level of each source —Vol Adj:

This setting is required for each source except FM. Before making an adjustment, select an appropriate source for which you want to make an adjustment.

Once you have adjusted it, it is memorized, and you will not need to adjust the volume level each time you change the source.

Adjust the input level to match the FM sound level.

•You cannot make an adjustment if the source is FM. “FIX” will appear.

To increase the level

To decrease the level

ENGLISH

27