JVC TK-C1460 E-30, Menu Setting, ALC SETTINGS Screen Continued, Functions and set values, Memo

MENU SETTING

ALC SETTINGS Screen (Continued)

	Item		Functions and set values	Initial value
B&W COLOUR		This function sets the colour modes to colour or B&W.
MODE		When switching the mode between “colour’ and “B&W” is
		carried out, the focus may be dislocated. In such a case
		adjust the focus again.
	B&W	Switches the mode from colour to B&W and visa-versa.		AUX
		OFF	: Turns the B&W mode switching function off.
		ON	: Sets the camera permanently to B&W mode.
		AUTO	: The camera automatically switches to Colour
			mode when the object is bright and B&W mode
			when it is dark. ( Page 40)
		AUX	: B&W/COLOUR switching is carried out
			according to the signal input from the AUX
			terminal. ( Page 41)
		MEMO
		• If AUTO is selected as the B&W item, the B&W/COLOUR
		setting can be switched as appropriate according to the
		brightness of the object, but illumination and screen
		conditions may make this impossible. Moreover, when
		you use infrared illumination, if the subject excessively
		reflects, a B/W screen can switch to a color screen. To
		make absolutely certain of B&W/COLOUR switching,
		set to AUX and input the control signal to the AUX
		terminal.
		• If AUX is selected as the B&W item, the AUX TERMINAL
		item is automatically set to B&W IN. If this changes to
		anything other than AUX, the AUX TERMINAL item
		reverts to the value set before the change was made.
		( Page 33.)
	LEVEL	When the “B&W” function is set to “AUTO”, this function		NORMAL
		sets the signal level of the object at which the camera will
		automatically switch to B&W mode.
		LOW	: Switches to B&W mode when the signal level of
			the object indicates low illumination.
		NORMAL: Switches to B&W mode when the signal level of
			the object indicates medium illumination.
		HIGH	: Switches to B&W mode when the signal level of
			the object indicates high illumination.
		MEMO
		When the item “B&W” is set to other than AUTO, “- - -” is
		displayed and the settings to the item “LEVEL” cannot be
		varied.

E-30