Pioneer KEH-P5950 operation manual Loudness Adjustment Loud, Front Image Enhancer Function FIE

4. Select the desired Q factor with the 5/∞ buttons.

2N += 1N += 1W += 2W

Note:

•If you make adjustments when a curve other than “CUSTOM” is selected, the newly adjusted curve will replace the previous adjusted curve. Then a new curve with “CUSTOM” appears on the display while selecting the equalizer curve. (Refer to page 27.)

Loudness Adjustment (LOUD)

The Loudness function compensates for deficiencies in the low and high sound ranges at low volume. You can select a desired Loudness level.

1.Press the AUDIO button and select the Loudness mode (LOUD) in the Audio Menu.

2.Switch the Loudness function

ON/OFF with the 5/∞ but- tons.

“ ”

3. Select the desired level with the 2/3 buttons.

LOW += MID += HI

Note:

•You can also switch the Loudness function ON/OFF by pressing the LOUD button. However, you cannot change the level.

Front Image Enhancer Function (FIE)

The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging by cutting mid- and high-range frequency output from the rear speakers, limiting their out- put to low-range frequencies. You can select the frequency you want to cut.

Precaution:

•When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not just bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in volume.

Continued overleaf.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

30