
Audio Adjustment
3. Boost or attenuate the selected band with the 5/∞ buttons.
The display shows “+6” – “–6”.
“CUSTOM”
Note:
•If you make adjustments when a curve other than “CUSTOM” is selected, the newly adjusted curve will replace the previous adjusted curve. Then a new curve with “CUSTOM” appears on the display while selecting the equalizer curve. (Refer to page 27.)
Equalizer Curve Fine Adjustment
You can adjust the center frequency and the Q factor (curve characteristics) of each cur- rently selected curve band
Level (dB)
Q=2N Q=2W
Center frequency | Frequency (Hz) |
1.Press the AUDIO button for 2 seconds to select Equalizer Curve Fine Adjustment.
2.Press the AUDIO button to
select the desired band for adjustment.
3. Select the desired frequency with the 2/3 buttons.
LOW: 40 Ô 80 Ô 100 Ô 160 (Hz)
MID: 200 Ô 500 Ô 1K Ô 2K (Hz)
HIGH: 3K Ô 8K Ô 10K Ô 12K (Hz)
29