TROUBLESHOOTING
IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICING DEALER.
PROBLEM | POSSIBLE CAUSE | SOLUTION | |
Engine will not start. | 1. No spark. | 1. | Check spark. Remove spark plug. Reattach the spark plug |
|
|
| cap and lay spark plug on metal cylinder. Pull the starter |
|
|
| rope and watch for spark at spark plug tip. If there is no |
|
|
| spark, repeat test with a new spark plug. |
| 2. No fuel. | 2. | Push primer bulb until fuel is visible in the bulb. If fuel is |
|
|
| not apparent, the primary fuel delivery system is blocked. |
|
|
| Contact a servicing dealer. If primer bulb fills, engine may |
|
|
| be flooded (see next item). |
| 3. Starter rope pulls harder now | 3. | Contact a servicing dealer. |
| than when new. |
|
|
|
|
| |
Engine starts but will | Carburetor requires adjustment. | Contact a servicing dealer. | |
not accelerate. |
|
|
|
|
|
| |
Engine starts but will | Carburetor requires adjustment. | Contact a servicing dealer. | |
only run at high speed |
|
|
|
at half choke. |
|
|
|
|
|
|
|
Engine does not reach | 1. Oil / fuel mixture is incorrect. | 1. | Use fresh fuel and the correct |
full speed and emits | 2. Air filter is dirty. | 2. | Clean air filter, refer to “Replacing and Cleaning the Air |
excessive smoke. |
|
| Filter” earlier in this manual. |
|
|
| |
| 3. Carburetor requires | 3. | Contact a servicing dealer. |
| adjustment. |
|
|
| 4. Spark arrestor screen is dirty. | 4. | Contact a servicing dealer. |
|
|
| |
Engine starts, runs, | Carburetor requires adjustment. | Turn idle speed adjustment screw clockwise to increase idle | |
and accelerates, but |
| speed. See Figure 15. | |
will not idle. |
|
|
|
|
|
|
|
IDLE SPEED
ADJUSTMENT
SCREW
Fig. 15
18