ASSEMBLY
WARNING:
Stop the engine and disconnect the spark plug wire before installing parts, making adjustments, cleaning, or when not in use. Failure to do so could result in possible serious personal injury.
INLET COVER
DOOR
INSTALLING THE VACUUM TUBES
See Figures 6 - 7.
To install the vacuum tubes:
nScrew the upper and lower vacuum tubes together and tighten securely.
nLoosen the door knob on the inlet cover door and open. Place the notch in the support arm of the upper vacuum tube under the hinge of the inlet cover door.
nPush the upper vacuum tube into the blower housing.
nAlign the upper vacuum tube knob with the hole in the housing and tighten securely.
To remove the vacuum tubes:
nLoosen the upper vacuum tube knob.
nRemove the vacuum tubes from the blower housing.
nClose the inlet cover door and tighten the door knob securely.
DOOR KNOB
Fig. 6
HINGE
UPPER
VACUUM TUBE
KNOB
NOTCH IN
SUPPORT ARM
Fig. 7
11
