NETGEAR manual GSM7224 Rear Panel, GSM7248 Front Panel and LEDs

Managed Layer 2 Switches GSM7224 and GSM7248 Hardware Installation Guide

GSM7224 Rear Panel

The rear panel has a console port, a redundant power supply connector, and a standard AC power receptacle for the supplied power cord.

	Redundant	Power receptacle
Console
	power supply
	connector

Figure 1-2

GSM7248 Front Panel and LEDs

The following figure shows the front panel of the GSM7248. The front panel contains LEDs, a USB port, a RST (reset) button, RJ-45 jacks, and copper/fiber combo ports.

LEDs USB port

Reset
button
	RJ-45 jacks	Copper/fiber
		combo ports

Figure 1-3

For information about the LEDs on the front panel of the switch, see “Interpreting the LEDs” on page 1-3.

1-2 Introduction

v1.0, July 2009