NETGEAR manual Replacement Power Adapter, Hub Integrity, Order code EN104TP, EN106TP

Hub Integrity

If required, verify the integrity of the hub by resetting it. Turn power to the switch off and then back on. If the problem continues and you have completed all the preceding diagnoses, contact NETGEAR Customer Support. For the phone number of the representative in your area, refer to the Support Information Card.

Replacement Power Adapter

If, for any reason, the power adapter for any of the hubs fails, please contact NETGEAR immediately to order a replacement adapter. Use the following table when ordering a specific power adapter.

Order code	EN104TP, EN106TP
PWR-024-001	Power adapter (7.5 V DC, 1 A), North America
PWR-024-002	Power adapter (7.5 V DC, 1 A), Europe
PWR-024-003	Power adapter (7.5 V DC, 1	A), United Kingdom
PWR-024-004	Power adapter (7.5 V DC, 1	A), Australia
PWR-024-005	Power adapter (7.5 V DC, 1	A), Japan

Order code	EN108TP
PWR-002-004	Power adapter (12 V DC, 1.2 A), North America
PWR-002-005	Power adapter (12 V DC, 1.2 A), Japan
PWR-002-006	Power adapter (12 V DC, 1.2	A), Europe
PWR-002-008	Power adapter (12 V DC, 1.2	A), United Kingdom
PWR-002-010	Power adapter (12 V DC, 1.2	A), Australia

Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide