Clarion DXZ575USB Basic Operations Adjusting Magna Bass Extend, Mute, To change sound mode

Basic Operations

Adjusting MAGNA BASS EXTEND Adjusting Sound Mode

The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.

1.Press and hold the [ ] button for 1 second or longer to turn on the MAGNA BASS EXTEND effect. “M-B EX” lights in the display.

2.Press and hold the [ ] button for 1 second or longer to turn off the MAGNA BASS EXTEND effect. “M-B EX” goes off from the display.

∗The adjustment can only be performed when the DZE is set to “DZE OFF”.

∗The factory default setting is off.

Mute

Use this function to turn off the sound immediately.

1.Press the [] button.

The sound turns off and “MUTE” blinks in the display.

2.Press the [] button again to cancel the mute mode.

To change sound mode

1.Press the [ ] button and select the sound mode to adjust.

2.Push the [SEEK PANEL] leftward or rightward to select the “item name”.

“S-W VOL” ↔ “DZE” ↔ “BASS” ↔

“TREBLE” ↔ “S RESTOR” ↔ “HPF” ↔ “S-W LPF” ↔ “BALANCE” ↔ “FADER”

3.Press the [UP] or [DN] button to select the “desired setting value”.

∗In the case of display blinking “ENT”, you

can press the [ ] button to adjust the setting value.

∗“BASS” and “TREBLE” can be adjusted only when “DZE” is set to “DZE OFF” (page 12).

∗After completing settings, press the [ ] button to return to the previous mode.

Note:

•During sound adjustment mode, if no operation is performed for more than 10 seconds, this mode can be canceled and return to the previous mode.

English

●Adjusting the subwoofer output

volume

You can adjust the volume output from the unit’s subwoofer output terminal.

2-1. Select the “S-W VOL”.

3-1. Press the [UP] or [DN] button to change the output volume.

∗The factory default setting is “0”. (Setting range: +5 to –5)

DXZ575USB 11