NETGEAR FS700TS manual LED Designations, Port LEDs on Non-PoE Devices

Page 20

Hardware Installation Guide for the Prosafe Stackable Smart Switch FS700TS Series

LED Designations

Port LEDs

The following table describes the port LED designations.

Table 1. Port LEDs Non-POE Device

Table 2-1. PORT LEDs on Non-PoE Devices

Port

LED

Designation

 

 

 

24/48 10/100M Ports—One

Link/ACT/SPD LED

Off : No 10/100Mbps link is established on the port.

LED/Port

 

Solid Green: A valid 100Mbps link is established on

 

 

the port.

 

 

Flashing Green: Packet transmission or reception is

 

 

occurring on the port at 100Mbps.

 

 

Solid Yellow: A valid 10Mbps link is established on

 

 

the port.

 

 

Flashing Yellow: Packet transmission or reception is

 

 

occurring on the port at 10Mbps.

 

 

 

4 Gigabit Copper Ports—

Left LED Link/ACT/

Off : No 10/100/1000Mbps link is established on the

Two LED's/Port on Jack

SPD LED:

port.

 

 

Solid Green: A valid 1000Mbps link is established on

 

 

the port.

 

 

Solid Yellow: A valid 10/100Mbps link is established

 

 

on the port.

 

 

Flashing Green: Packet transmission or reception is

 

 

occurring on the port at 1000Mbps.

 

 

Flashing Yellow: Packet transmission or reception is

 

 

occurring on the port at 10/100Mbps.

 

 

 

 

Right LED Stack

Green: Stack port has a valid link connection.

 

LED (Combo port

Off: Stack port does not have a valid link connection.

 

group/Copper port

 

 

group):

 

2 SFP Ports—One LED/Port

SFP Link/ACT LED

Off: No link is established on the port.

 

 

Solid Green: A valid link is established on the port.

 

 

Flashing Green: Packet transmission or reception is

 

 

occurring on the port.

 

 

 

2-10

Introduction

v1.0, December 2005

Image 20
Contents NETGEAR, Inc Trademarks Statement of ConditionsCertificate of the Manufacturer/Importer Voluntary Control Council for Interference Vcci StatementWorld Wide Web EU Declaration of ConformityCustomer Support Product and Publication Details Contents Chapter Troubleshooting Typographical Conventions Chapter About This ManualAudience, Scope, Conventions, and Formats Manual Scope How to Use This ManualHow to Print this Manual Printing a Chapter V1.0, December Chapter Introduction OverviewV1.0, December Stacking Features Other Features Application Example-Desktop Switching Package Contents Panel Layout Guide FS728TS Front PanelFS752TS Front Panel FS752TPS Front Panel LED Designations Port LEDs on Non-PoE DevicesPort DesignationPort Leds on PoE Devices System LEDs Solid Yellow PoE LED ModeFront Panel Buttons Device Hardware Interfaces RJ-45 PortsV1.0, December Chapter Installation Characteristics RequirementsPreparing the Site Site RequirementsInstalling the Switch in a Rack Installing the SwitchInstalling the Switch on a Flat Surface Checking the Installation Connecting Devices to the Switch Installing an SFP Gbic Module Installing Device as Stand-alone or Stack MasterV1.0, December Applying AC Power V1.0, December Chapter Troubleshooting Troubleshooting ChartTroubleshooting Chart Symptom Cause SolutionAdditional Troubleshooting Suggestions ConfigurationSwitch Integrity Network Adapter CardsAuto-negotiation V1.0, December Appendix a Technical Specifications Power Supply Physical SpecificationsEnvironmental Specifications SafetyV1.0, December V1.0, December Appendix B Related Documents Document LinkV1.0, December

FS700TS specifications

The NETGEAR FS700TS is a reliable and efficient switch designed for small to medium-sized businesses that require robust network solutions. This product is part of NETGEARā€™s FS series, well-known for delivering cost-effective Ethernet switching technologies. The FS700TS is specifically engineered to enhance network performance, security, and manageability.

One of the key features of the FS700TS is its 24-port capacity. This gives organizations ample room to connect various devices, ensuring that all networked equipment can communicate seamlessly. Each port supports auto-sensing, which allows for automatic detection of the connected devices, making setup incredibly straightforward. This plug-and-play design eliminates the need for complex configurations, enabling businesses to deploy their networks without extensive IT resources.

The FS700TS is equipped with Layer 2 switching capabilities, providing enhanced data handling processes. It supports features like VLAN tagging, allowing for the segmentation of network traffic for improved performance and security. The ability to create virtual LANs improves network efficiency by minimizing broadcast traffic and enabling a more organized networking environment.

Another standout characteristic of the NETGEAR FS700TS is its Quality of Service (QoS) capabilities. This feature ensures that critical data traffic, such as voice over IP or video conferencing, is prioritized, leading to a better overall user experience. By allocating bandwidth dynamically, FS700TS helps prevent lag and delays in communication.

Power consumption is also a notable factor with the FS700TS. It is designed with energy efficiency in mind, aligning with the Energy Star standards. This commitment to reducing power usage not only lowers operational costs for businesses but also contributes positively to environmental sustainability efforts.

In terms of build quality, the FS700TS features a sturdy metal chassis, ensuring durability in various environments. Its compact design allows for flexible placement in network racks, saving valuable space in server rooms or offices.

Overall, the NETGEAR FS700TS provides a solid combination of performance, manageability, and scalability. Its advanced features, such as VLAN support, QoS, and energy efficiency, make it an excellent choice for businesses looking to enhance their networking capabilities without overspending. With the reliability that NETGEAR is known for, the FS700TS is poised to meet the demands of modern networking needs effectively.