NETGEAR FS700TS manual Port Leds on PoE Devices

Page 21

Hardware Installation Guide for the Prosafe Stackable Smart Switch FS700TS Series

Table 2-2. Port LEDS on PoE Devices

Port

LED

Designation

 

 

 

48 10/100M Ports—One

Link/ACT/SPD LED

Off: No 10/100Mbps link is established on the port.

LED/Port (Ethernet Mode)

 

Solid Green: A valid 100Mbps link is established on

 

 

the port.

 

 

Flashing Green: Packet transmission or reception

 

 

is occurring on the port at 100Mbps.

 

 

Solid Yellow: A valid 10Mbps link is established on

 

 

the port.

 

 

Flashing Yellow: Packet transmission or reception

 

 

is occurring on the port at 10Mbps.

 

 

 

24 10/100M Ports—One

POE Indicate LED/

Solid Green: The PoE powered device (PD) is

LED/Port (PoE Mode)

POE fault

connected and the port is supplying power

 

 

successfully.

 

 

Solid Yellow: Indicates one of the following failures

 

 

resulted in stopping power to that port:

 

 

• Short circuit on PoE power circuit

 

 

• PoE power demand exceeds power available

 

 

• PoE current exceeds PD's classification

 

 

• Out of proper voltage band (44 ~ 57 VDC)

 

 

Off: No PoE powered device (PD) connected.

 

 

Note: PoE mode is only available on the leftmost 24

 

 

of the 10/100M ports (ports 1-24).

 

 

 

4 Gigabit Copper Ports—

Left LED Link/ACT/

Off: No 10/100/1000Mbps link is established on the

Two LED's/Port on Jack

SPD LED:

port.

 

 

Solid Green: A valid 1000Mbps link is established

 

 

on the port.

 

 

Solid Yellow: A valid 10/100Mbps link is established

 

 

on the port.

 

 

Flashing Green: Packet transmission or reception

 

 

is occurring on the port at 1000Mbps.

 

 

Flashing Yellow: Packet transmission or reception

 

 

is occurring on the port at 10/100Mbps.

2 SFP Ports—One LED/Port

SFP Link/ACT LED

Off: No link is established on the port.

 

 

Solid Green: A valid link is established on the port.

 

 

Flashing Green: Packet transmission or reception

 

 

is occurring on the port.

 

 

 

Introduction

2-11

v1.0, December 2005

Image 21
Contents NETGEAR, Inc Statement of Conditions TrademarksCertificate of the Manufacturer/Importer Voluntary Control Council for Interference Vcci StatementEU Declaration of Conformity Customer SupportWorld Wide Web Product and Publication Details Contents Chapter Troubleshooting Chapter About This Manual Audience, Scope, Conventions, and FormatsTypographical Conventions How to Use This Manual How to Print this ManualManual Scope Printing a Chapter V1.0, December Overview Chapter IntroductionV1.0, December Stacking Features Other Features Application Example-Desktop Switching Package Contents FS728TS Front Panel Panel Layout GuideFS752TS Front Panel FS752TPS Front Panel Port LEDs on Non-PoE Devices LED DesignationsPort DesignationPort Leds on PoE Devices Solid Yellow PoE LED Mode Front Panel ButtonsSystem LEDs RJ-45 Ports Device Hardware InterfacesV1.0, December Characteristics Requirements Chapter InstallationPreparing the Site Site RequirementsInstalling the Switch Installing the Switch on a Flat SurfaceInstalling the Switch in a Rack Checking the Installation Connecting Devices to the Switch Installing Device as Stand-alone or Stack Master Installing an SFP Gbic ModuleV1.0, December Applying AC Power V1.0, December Troubleshooting Chart Chapter TroubleshootingTroubleshooting Chart Symptom Cause SolutionConfiguration Additional Troubleshooting SuggestionsSwitch Integrity Network Adapter CardsAuto-negotiation V1.0, December Appendix a Technical Specifications Physical Specifications Power SupplyEnvironmental Specifications SafetyV1.0, December V1.0, December Document Link Appendix B Related DocumentsV1.0, December

FS700TS specifications

The NETGEAR FS700TS is a reliable and efficient switch designed for small to medium-sized businesses that require robust network solutions. This product is part of NETGEARā€™s FS series, well-known for delivering cost-effective Ethernet switching technologies. The FS700TS is specifically engineered to enhance network performance, security, and manageability.

One of the key features of the FS700TS is its 24-port capacity. This gives organizations ample room to connect various devices, ensuring that all networked equipment can communicate seamlessly. Each port supports auto-sensing, which allows for automatic detection of the connected devices, making setup incredibly straightforward. This plug-and-play design eliminates the need for complex configurations, enabling businesses to deploy their networks without extensive IT resources.

The FS700TS is equipped with Layer 2 switching capabilities, providing enhanced data handling processes. It supports features like VLAN tagging, allowing for the segmentation of network traffic for improved performance and security. The ability to create virtual LANs improves network efficiency by minimizing broadcast traffic and enabling a more organized networking environment.

Another standout characteristic of the NETGEAR FS700TS is its Quality of Service (QoS) capabilities. This feature ensures that critical data traffic, such as voice over IP or video conferencing, is prioritized, leading to a better overall user experience. By allocating bandwidth dynamically, FS700TS helps prevent lag and delays in communication.

Power consumption is also a notable factor with the FS700TS. It is designed with energy efficiency in mind, aligning with the Energy Star standards. This commitment to reducing power usage not only lowers operational costs for businesses but also contributes positively to environmental sustainability efforts.

In terms of build quality, the FS700TS features a sturdy metal chassis, ensuring durability in various environments. Its compact design allows for flexible placement in network racks, saving valuable space in server rooms or offices.

Overall, the NETGEAR FS700TS provides a solid combination of performance, manageability, and scalability. Its advanced features, such as VLAN support, QoS, and energy efficiency, make it an excellent choice for businesses looking to enhance their networking capabilities without overspending. With the reliability that NETGEAR is known for, the FS700TS is poised to meet the demands of modern networking needs effectively.