NetComm quick start NetComm NB5PLUS4W QuickStart Guide for Mac

Page 6

NetComm NB5PLUS4W QuickStart Guide for Mac

Your dialog box should now look like this:

16.If your Mac does not accept an IP address from the DHCP server in your NB5PLUS4W and the IP address field remains blank, try selecting “Using DHCP with manual address” from the “Configure” pop-up menu (“Configure iPV4” if you’re using Mac OS 10.3) and entering 192.168.1.3 in the “IP address” field.

17.Click on the “Show” pop-up menu and select “Network Status”. Check to see that the bullet alongside “Ethernet Adaptor (en2)” is green.

18.Close the Network window by clicking the red close button (System 10.3) or select “Quit System Preferences” under the “System Preferences” menu (System 10.2 or earlier).

© NetComm Limited 2005

p 6

Image 6
Contents NB5PLUS4W Quick Start Guide for Mac Start Here NetComm NB5PLUS4W QuickStart Guide for Mac USB Installation Install the HardwareNetComm NB5PLUS4W QuickStart Guide for Mac NetComm NB5PLUS4W QuickStart Guide for Mac NetComm NB5PLUS4W QuickStart Guide for Mac Ethernet Installation Mac OSNetComm NB5PLUS4W QuickStart Guide for Mac Mac OS X 10.3 Panther & 10.4 Tiger NetComm NB5PLUS4W QuickStart Guide for Mac NetComm NB5PLUS4W QuickStart Guide for Mac Airport Installation NetComm NB5PLUS4W QuickStart Guide for Mac NetComm NB5PLUS4W QuickStart Guide for Mac NetComm NB5PLUS4W QuickStart Guide for Mac NetComm NB5PLUS4W QuickStart Guide for Mac Modem SET-UP NetComm NB5PLUS4W QuickStart Guide for Mac