User Manual
3. Operating Instructions (contd.)
5.Shelving Filter Bypass switch allows the filter to be taken out of circuit. This allows you to hear its effects when compared to the unfiltered sound, and also to allow low frequencies to pass unaffected.
6.Shelving Filter Frequency rotary potentiometers enable control of the LF and HF shelf frequency.
7.Shelving EQ section faders enable control of the amount of cut or boost, a centre detent is provided at 0dB.
8.The
9.The Dynamics Bypass switch allows the whole section to be taken out of circuit.
10.The Dynamics section features a Limiter and a Gate. The Gate Threshold potentiometer controls the level of signal necessary to turn on the gate. Below this level, the signal is attenuated in such a way that unwanted noises such as hiss and hum are reduced. The Gate LED illuminates when the signal is below threshold, indicating the gate is "closed".
11.The Limiter Threshold potentiometer controls the level above which gain is reduced in order to keep the level constant, thus avoiding damage to succeeding equipment. A 3 LED progressive luminosity bargraph indicates the gain reduction or "amount of limiting". The Threshold ranges of the Gate and Limiter are such that in the extreme positions (Gate at
12.The Phase Reverse switch reverses the connections of the output XLR connectors. This passive arrangement guarantees that, even when the unit is off, the phase condition is retained. A red LED illuminates to indicate the Reverse condition.
© LA Audio 2004 | 12 |
