NetComm NP290W manual Restore Settings, Reboot

Page 14

7.8Restore Settings

You can use a backup file with a BAK extension to change device settings.

To restore settings from backup file:

1.From the Web User Interface, click System Menu.

2.Select Configuration Tools.

3.Select Backup Settings/Restore settings.

4.Click Apply. This opens the Configuration Tools page.

5.Under Restore Settings, click Browse. Specify the location of the backup file. The back up files ends with a BAK extension.

6.Click Restore Settings.

You can reboot the device using the Web User Interface.

To reboot:

1.From the Web User Interface, click System Menu.

2.Select Reboot. This opens the Reboot page.

3.Click Reboot.

14	NP290W User Guide
	YML849Rev 1

Image 14

Contents User Guide Contents Introduction Typical NP290W Turbo Wireless HomePlug ConnectionPackage Contents Minimum RequirementsNP290W Turbo Wireless HomePlug Overview Light Indicators and PortsIP Address you used if you changed the default Hardware InstallationTo connect the HomePlug Wireless Adapter with a computer Open a browserAccessing the Web User Interface Using the CD Setup UtilityTo use the CD Setup Utility To access the Web User Interface Open a browserConfiguring TCP/IP To connect with wireless devices for Microsoft XP Locate your wireless network connection iconAbout the Web User Interface Navigation Menus and SubmenusChanging the Administrator Password Advanced ConfigurationAdministrator Settings Retype password Enter Auto-logout Time Click SaveRemote HomePlugs Detecting HomePlug DevicesChanging the Private Network Name Local HomePlugsLAN Settings Private Network Name ResetBackup Settings Firmware UpgradeRestore to Factory Default Restore Settings RebootTo configure the wireless settings Wireless SettingsSettings Select Settings. This opens the Wireless SettingsSelect an Encryption Type None To configure the wireless security settingsSecurity Then click Connect AP AP ModeDefault Administrator password is admin Click OK. This takes you backSystem Log DiagnosticsSystem Status To display the system statusSafety Summary Messages Important Safety InstructionsNP290W User Guide