Appendix D Registering your NetComm Product

Appendix D: Registering your NetComm Product

All NetComm Limited (“NetComm”) products have a standard 12 month warranty from date of purchase against defects in manufacturing and that the products will operate in accordance with the specifications outlined in the User Guide. However some products have an extended warranty option (please refer to packaging). To be eligible for the extended warranty you must supply the requested warranty information to NetComm within 30 days of the original purchase by registering on-line via the NetComm web site at:

www.netcomm.com.au

Contact Information

If you have any technical difficulties with your product, please do not hesitate to contact NetComm’s Customer Support Department.

Email:support@netcomm.com.au

Fax:	(+612) 9424-2010

Web:www.netcomm.com.au

Legal & Regulatory Information

This manual is copyright. Apart from any fair dealing for the purposes of private study, research, criticism or review, as permitted under the Copyright Act, no part may be reproduced, stored in a retrieval system or transmitted in any form, by any means, be it electronic, mechanical, recording or otherwise, without the prior written permission of NetComm Limited. NetComm Limited accepts no liability or responsibility, for consequences arising from the use of this product.

NetComm Limited reserves the right to change the specifications and operating details of this product without notice. NetComm is a registered trademark of NetComm Limited.

All other trademarks are acknowledged the property of their respective owners.

Customer Information

ACA (Australian Communications Authority) requires you to be aware of the following information and warnings:

(1)This unit shall be connected to the Telecommunication Network through a line cord which neets the requirements of the ACA TS008 Standard.

(2)This equipment has been tested and found to comply with the Standards for C-Tick and or A-Tick as set by the ACA . These standards are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio noise and, if not installed and used in accordance with the instructions detailed within this manual, may cause interference to radio communications. However, there is no guarantee that interference will not occur with the installation of this product in your home or office. If this equipment does cause some degree of interference to radio or television reception, which can be determined by turning the equipment off and on, we encourage the user to try to correct the interference by one or more of the following measures:

•Change the dirtection or relocate the receiving antenna.

•Increase the separation between this equipment and the receiver.

•Connect the equipment to an alternate power outlet on a different power circuit from that to which the receiver/TV is connected.

•Consult an experienced radio/TV technician for help.

(3)The power supply that is provided with this unit is only intented for use with this product. Do not use this power supply with any other product or do not use any other power supply that is not approved for use with this product by NetComm. Failure to do so may cause damage to this product, fire or result in personal injury.

NetComm NPPOE1001 Power over Ethernet Kit	YML720Rev1
14	www.netcomm.com.au

NPPOE1001 specifications

The NetComm NPPOE1001 is a robust Power over Ethernet (PoE) solution designed to meet the demands of modern networking environments. As a single-port PoE injector, it provides both data and power to network devices over standard Ethernet cabling. The NPPOE1001 is particularly well-suited for deployments where electrical outlets are limited or where clean installation is a priority.

One of the main features of the NPPOE1001 is its IEEE 802.3af compliance, which enables it to deliver up to 15.4 watts of power per port. This capability makes it compatible with a wide range of devices, including IP cameras, VoIP phones, and wireless access points. By using existing Ethernet cables, the NPPOE1001 simplifies the installation process, reducing the need for additional wiring and minimizing costs and downtime.

In terms of technology, the NPPOE1001 employs advanced PoE technology that ensures reliable power delivery while minimizing energy loss. It efficiently manages power output, allowing the connected devices to operate at optimal efficiency. The device also features built-in surge protection, ensuring that sensitive network equipment is safeguarded from electrical surges that can occur in a dynamic electrical environment.

One of the notable characteristics of the NPPOE1001 is its compact and rugged design, making it suitable for various installation environments. It can be easily mounted on walls or placed on a desktop, providing flexibility in deployment. The unit is designed to operate reliably in a wide temperature range, ensuring that it remains functional in both warm and cool environments.

Another advantage of the NPPOE1001 is its plug-and-play operation. There is no need for complex configuration, allowing for rapid deployment in various scenarios. Additionally, it supports auto-sensing technology, which automatically detects and delivers the required power output for compatible devices.

The NPPOE1001 also features LED indicators for power and connectivity status, making it easy for users to monitor the operational status at a glance. Its compact form factor and ease of integration make it an appealing choice for both small businesses and larger network infrastructures.

Overall, the NetComm NPPOE1001 is a versatile and efficient solution for organizations looking to enhance their networking capabilities while simplifying power deployment across various devices. It stands as a reliable option for those needing a seamless and efficient PoE injector solution.