NetComm NPPOE1001 manual Important Information, What you should know about Power Over Ethernet PoE

Page 3

Important Information

What you should know about Power Over Ethernet (PoE)

Power-over-Ethernet (PoE) or "Active Ethernet" eliminates the need to run 240 Volt power to Wireless Access Points and other devices on a wired LAN. Using Power-over-Ethernet systems, installers need to run only a single CAT5 Ethernet cable that carries both power and data to each device. This allows greater flexibility in the locating of AP's and network devices and significantly decreasing installation costs in many cases. The placement of a Network device can be up to 328 feet (100 meters) away by using standard category 5 Ethernet cable.

Power-over-Ethernet begins with a CAT5 "Injector" that inserts a DC Voltage onto the CAT5 cable. The Injector is typically installed in the "wiring closet" near the Ethernet switch or hub.

Some Wireless Access Points and other network accept the injected DC power directly from the CAT5 cable through their RJ45 jack. These devices are considered to be "PoE-Compatible" or "Active Ethernet Compatible".

Devices that are not "PoE Compatible" can be converted to Power-over-Ethernet by way of a DC "Picker" or "Tap". These are sometimes called Active Ethernet "Splitters". This device picks-off the DC Voltage that has been injected into the CAT5 cable by the Injector and makes it available to the equipment through the regular DC power jack.

WARNING: Never connect the Injector - Power Over Ethernet Out directly to a network device such as a Hub, Switch, IP Camera or Print Server unless you are ABSOLUTELY sure the device and network is PoE Compatible. Additionally, make sure your PoE compatible device or network is designed to handle the 48 volts DC delivered by the PoE injector. If you do not check the POE compatibility and voltage required, you will damage the attached device, the Injector and any computer connected to the network. NetComm will not accept any responsibility for any loss or damage araising from the use of this product in the wrong manner.

PLEASE ENSURE THAT YOU COMPLETLY READ THE FOLLOWING

INSTRUCTIONS AND COMPLY WITH THEM BEFORE CONNECTING ANY

DEVICE OR POWER.

By proceeding to use this product you agree that you have read these instructions carefully and accept this disclaimer. Any damage to the product due to a failure to follow the instructions in this guide will void the warranty.

YML720 Rev1

NetComm NPPOE1001 Power over Ethernet Kit

www.netcomm.com.au

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Page Contents Important Information What you should know about Power Over Ethernet PoEIntroduction Package ContentsInstallation POE InjectorInjector Splitter POE SplitterStep Connecting the Power-over-Ethernet Adapter KitNetComm NPPOE1001 Power over Ethernet Kit YML720Rev1 YML720 Rev1 RJ-45 Ethernet Network Ports Appendix a Cable ConnectionsWireBecomes Injector LED does not light up Appendix B TroubleshootingCSMA/CD Appendix C Technical SpecificationsCustomer Information Appendix D Registering your NetComm ProductContact Information Legal & Regulatory InformationLimitations of Warranty Product WarrantyTechnical Specifications

NPPOE1001 specifications

The NetComm NPPOE1001 is a robust Power over Ethernet (PoE) solution designed to meet the demands of modern networking environments. As a single-port PoE injector, it provides both data and power to network devices over standard Ethernet cabling. The NPPOE1001 is particularly well-suited for deployments where electrical outlets are limited or where clean installation is a priority.

One of the main features of the NPPOE1001 is its IEEE 802.3af compliance, which enables it to deliver up to 15.4 watts of power per port. This capability makes it compatible with a wide range of devices, including IP cameras, VoIP phones, and wireless access points. By using existing Ethernet cables, the NPPOE1001 simplifies the installation process, reducing the need for additional wiring and minimizing costs and downtime.

In terms of technology, the NPPOE1001 employs advanced PoE technology that ensures reliable power delivery while minimizing energy loss. It efficiently manages power output, allowing the connected devices to operate at optimal efficiency. The device also features built-in surge protection, ensuring that sensitive network equipment is safeguarded from electrical surges that can occur in a dynamic electrical environment.

One of the notable characteristics of the NPPOE1001 is its compact and rugged design, making it suitable for various installation environments. It can be easily mounted on walls or placed on a desktop, providing flexibility in deployment. The unit is designed to operate reliably in a wide temperature range, ensuring that it remains functional in both warm and cool environments.

Another advantage of the NPPOE1001 is its plug-and-play operation. There is no need for complex configuration, allowing for rapid deployment in various scenarios. Additionally, it supports auto-sensing technology, which automatically detects and delivers the required power output for compatible devices.

The NPPOE1001 also features LED indicators for power and connectivity status, making it easy for users to monitor the operational status at a glance. Its compact form factor and ease of integration make it an appealing choice for both small businesses and larger network infrastructures.

Overall, the NetComm NPPOE1001 is a versatile and efficient solution for organizations looking to enhance their networking capabilities while simplifying power deployment across various devices. It stands as a reliable option for those needing a seamless and efficient PoE injector solution.
Top Page Image Contents